$2000 and Up

SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States AR500 Armor Level III Body Armor Essential protection ought to be affordable and reliable, which is why AR500 Armor is proud to offer one of the most cost-effective plates on the market with our Steel Level III (specifications below): An AR500 Steel plate, cut in our patented Advanced Shooters Cut shape and design, and covered with an exclusive FragLock™ Coat, in Base and Build-Up forms.  Our Level III Steel, unlike ceramic or polyethylene alternatives, is capable of protecting against several direct hits while still being less bulky than competing materials. It also has been independently tested in accordance with NIJ 0101.06 threat levels through Oregon Ballistics (OBL), and H.P. White Laboratories. This means it is rated to stop 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS, and special threat tested to stop 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS. A benefit not elsewhere found in the industry, the Advanced Shooters Cut shape affords you additional room for your rifle stock, improving comfort and shooting ergonomics; this is available in right and left-handed configurations. It is also compatible with all standard plate carriers that accept SAPI or traditional Shooters Cut body armor, given there is an appropriately sized chest plate pocket. Finally, the FragLock™ Coat is a unique feature that guarantees two benefits: First, it gives a twenty-year maintenance-free shelf life - making this steel plate far outlast ceramic or polyethylene alternatives. Second, the coating mitigates the dangers of spalling (when pieces of steel fragment off) and fragmentation (when the bullet’s remains fragment off), protecting the wearer from both the direct ballistic impact and the aftermath of the impact. The Build-Up Coat features stronger protection with the tradeoff of greater weight and size, while the Base Coat is lighter and thinner with less protection. SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States

SPECIFICATIONS Material: Military-grade ½” MIL-A 46100 steel plate Weight:  5.75 lbs x 2 weighted plates = 11.5 lbs 8.75 lbs x 2 weighted plates = 17.5 lbs 10 lbs x 2 weighted plates (8" x 10") = 20 lbs 15 lbs x 2 weighted plates = 30 lbs AR500 Armor Weighted Training Plate You will be passing these training plates down for generations, we guarantee it. Available in 5.75lb, 8.75lb & 15lb, these Training Plates fit all plate carriers designed to accept 10” x 12” body armor or larger. Ergonomically designed to mimic armor by the form of a common shooter cut. Improved with an upper relief cut for better mobility while using a plate carrier during training and workouts.  Our Advanced Training Cut is designed to meet the needs of members of Crossfit to allow the weight of the plates and carrier to reach the 14/20 rule. *+/- 0.2875lbs for the 5.75lb plate (5.46-6.04lbs) Additionally, we offer an 8" x 10" weight plate set at 10lbs each. SPECIFICATIONS Material: Military-grade ½” MIL-A 46100 steel plate Weight:  5.75 lbs x 2 weighted plates = 11.5 lbs 8.75 lbs x 2 weighted plates = 17.5 lbs 10 lbs x 2 weighted plates (8" x 10") = 20 lbs 15 lbs x 2 weighted plates = 30 lbs

Highlights Durable: crafted from genuine Cordura® nylon, Hypalon® pull-tabs, and genuine Velcro®; reinforced bar-tacks at all stress points. Versatile: accommodates most single- and double-stack magazines, detachable & adjustable retention flap Light: Single weighs approx 1.6 ounces; double, 1.9 ounces; triple, 3.2 ounces Malice Clips: Single Pistol Magazine Pouch: one short (small) malice clip Double Pistol Magazine Pouch: two short (small) malice clips Triple Pistol Magazine Pouch: two short (small) malice clips AR500 Armor Multi-Caliber Pistol Magazine Single Pouch (MCPMP) The Multi-Caliber Pistol Magazine Pouch accommodates all common pistol magazines in single or double stack form from .22LR to .50AE, and everything in between, even Five-Seven! It’s the perfect companion to our Multi-Caliber Rifle Magazine Pouch. Secure, easy access to your handgun magazines Pouches are constructed from genuine 500D Cordura nylon, and retention flaps feature an easy-to-grip Hypalon® pull tab. The removable retention strap allows you to adjust for magazine capacity, size, and retention...or remove it entirely to run an opened-top configuration. Includes one, two, or three MALICE CLIPS®, as appropriate, to attach to your MOLLE-compatible platform. Highlights Durable: crafted from genuine Cordura® nylon, Hypalon® pull-tabs, and genuine Velcro®; reinforced bar-tacks at all stress points. Versatile: accommodates most single- and double-stack magazines, detachable & adjustable retention flap Light: Single weighs approx 1.6 ounces; double, 1.9 ounces; triple, 3.2 ounces Malice Clips: Single Pistol Magazine Pouch: one short (small) malice clip Double Pistol Magazine Pouch: two short (small) malice clips Triple Pistol Magazine Pouch: two short (small) malice clips

IFAK Refill contents: 1 x SWAT-T 1 x Hyfin compact twin chest seal 1 x Celox EMS 1 x NAR Responder Bandage 1 x Compressed Gauze 1 x Trauma Shears 1 x H&H Duct Tape 1 x NAR Bear Claw Gloves 1 x Casualty Card 1 x Marker AR500 Armor AR Individual First Aid Kit (IFAK) The AR500 IFAK Refill is designed to resupply our regular and quick-detach IFAK pouches. Everything you need and nothing you don't Our IFAK Refill is compact and portable. This refill includes the necessary tools to treat life-threatening bleeding wounds such as gunshots, knife/stab wounds, or other serious bleeding injuries including arterial bleeding. IFAK Refill contents: 1 x SWAT-T 1 x Hyfin compact twin chest seal 1 x Celox EMS 1 x NAR Responder Bandage 1 x Compressed Gauze 1 x Trauma Shears 1 x H&H Duct Tape 1 x NAR Bear Claw Gloves 1 x Casualty Card 1 x Marker

SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States AR500 Armor Level III Body Armor With Build Up Coat Essential protection ought to be affordable and reliable, which is why AR500 Armor is proud to offer one of the most cost-effective plates on the market with our Steel Level III (specifications below): An AR500 Steel plate, cut in our patented Advanced Shooters Cut shape and design, and covered with an exclusive FragLock™ Coat, in Base and Build-Up forms.  Our Level III Steel, unlike ceramic or polyethylene alternatives, is capable of protecting against several direct hits while still being less bulky than competing materials. It also has been independently tested in accordance with NIJ 0101.06 threat levels through Oregon Ballistics (OBL), and H.P. White Laboratories. This means it is rated to stop 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS, and special threat tested to stop 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS. A benefit not elsewhere found in the industry, the Advanced Shooters Cut shape affords you additional room for your rifle stock, improving comfort and shooting ergonomics; this is available in right and left-handed configurations. It is also compatible with all standard plate carriers that accept SAPI or traditional Shooters Cut body armor, given there is an appropriately sized chest plate pocket. Finally, the FragLock™ Coat is a unique feature that guarantees two benefits: First, it gives a twenty-year maintenance-free shelf life - making this steel plate far outlast ceramic or polyethylene alternatives. Second, the coating mitigates the dangers of spalling (when pieces of steel fragment off) and fragmentation (when the bullet’s remains fragment off), protecting the wearer from both the direct ballistic impact and the aftermath of the impact. The Build-Up Coat features stronger protection with the tradeoff of greater weight and size, while the Base Coat is lighter and thinner with less protection. SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States

SPECIFICATIONS Material: Heavy-duty webbing and Hypalon® pull-tab Dimensions: 8" x 2.5" x 0.75" Weight: 2 ounces Features: heavy-duty elastic and Velcro® ensures your ammo will be where you put it when you need it. AR500 Armor Shotgun Card Our shotgun card is designed to hold seven rounds of 12-gauge shotgun ammunition in an easily accessible manner. Seven rounds, no waiting Made of heavy-duty 2” webbing, the shotgun reload card attaches to any loop Velcro® platform, such as the Velcro on our plate carrier webbing or i.d. area, or the side of your shotgun receiver with similar loop Velcro attached to it. Weighs only 2 ounces and is 8”x2.5” in size. SPECIFICATIONS Material: Heavy-duty webbing and Hypalon® pull-tab Dimensions: 8" x 2.5" x 0.75" Weight: 2 ounces Features: heavy-duty elastic and Velcro® ensures your ammo will be where you put it when you need it.

SPECIFICATIONS Material: 500D Nylon Supported Plate Size: 10”x12” Size: For body types M to XXL Weight: 2.2 lbs Features: Collapsible carry handle, large Velcro ID panels Manufactured: Vietnam (AR500 Armor) & Berry Compliant Highlights: Berry compliant: 100% designed, sourced, and manufactured in the USA Durable: genuine Cordura® 500D nylon construction, bar-tack stitching at all stress-points and webbing, front-mounted, quick-release buckles with laminated nylon protective covers Adaptable: dual admin pockets w/laminated nylon pull tabs Comfortable: adjustable cummerbund with Velcro® inner lining, mesh padded removable shoulder pads. Built-in front and rear inner lining plate pocket padding. Fits sizes M-XXL AR500 Armor Valkyrie™ Plate Carrier The Valkyrie™ Plate Carrier (specifications below) was designed to be a 100% Berry compliant plate carrier that provides the same quality as upper-tier plate carriers at a more modest price. The Valkyrie is compatible with all 10”x12” trapezoidal steel, ceramic, or polyethylene body armor, and features everything you’d expect in a top-of-the-line carrier. From its dual admin pouches compatible with our Kangaroo magazine pouch insert, fully adjustable cummerbund and generously sized Velcro ID panels, the Valkyrie brings together the ideal balance of quality components and craftsmanship, ergonomics, and comfort. SPECIFICATIONS Material: 500D Nylon Supported Plate Size: 10”x12” Size: For body types M to XXL Weight: 2.2 lbs Features: Collapsible carry handle, large Velcro ID panels Manufactured: Vietnam (AR500 Armor) & Berry Compliant Highlights: Berry compliant: 100% designed, sourced, and manufactured in the USA Durable: genuine Cordura® 500D nylon construction, bar-tack stitching at all stress-points and webbing, front-mounted, quick-release buckles with laminated nylon protective covers Adaptable: dual admin pockets w/laminated nylon pull tabs Comfortable: adjustable cummerbund with Velcro® inner lining, mesh padded removable shoulder pads. Built-in front and rear inner lining plate pocket padding. Fits sizes M-XXL

The Target Man™ DIY “Do-It-Yourself” AR550 Dueling Tree Target Kit | Extreme High HardnessNEW- AR550 DIY Dueling Tree Target Kit! The AR550 DIY Dueling Tree Target Kit is designed to provide the shooter with extreme wear resistance due to its extreme high hardness. With a 10% increase in hardness, our DIY AR550 Dueling Tree Target Kit is sure to provide you with a lifetime of fun! Though we still rate them to withstand the same abuse as our AR500 Dueling Tree Target Kits, the added hardness provides a little extra “insurance” against and early target fatigue and a definite increase in life expectancy.Please note: The DIY Dueling Tree is designed to save you a ton of money! If you're not a welder, we do offer dueling trees that are already built and ready to go. Please check our reactive target category for the pre-built dueling tree. Absolutely nothing for you to do or source if you go that route.A TTM Original! This is for the “Do-It-Yourselfer” who has access to a welder! Make your own dueling tree at a fraction of the cost compared to purchasing one that is pre-built. Constructed from 3/8″ AR550 ballistic grade steel, these paddles can take some severe abuse! Each AR550 paddle measures 6″ in diameter.  Shoot with any pistol/magnum round from any safe distance (we highly recommend a minimum of 10 yards for maximum safety)! Shoot with high-caliber (ball ammo) center-fire weapons traveling 3200 feet per second (FPS) or less from 100 yards. We have sold thousands of these kits and everyone loves how easy this tree is to build! Angle iron measurements: 4 paddle tree- 46" 6 paddle tree- 66" 8 paddle tree- 84" INCLUDED INSTRUCTIONS! Building this dueling tree is super easy!Optional .22LR Paddles: We have added optional paddles so shooters can use .22LR ammo (assuming you can find it)! Ammo is expensive, so our newly added 1/4″ A36 Hot Rolled Pickled and Oiled (HRPO) paddles are sure to react with this light caliber ammo. Designed for .22 roundsonly. You risk damage to the target should you shoot with higher caliber ammunition!Optional Pivot Tube Upgrade: As an option, we've added BEEFY 1.5″ DOM pivot tubes. The DOM pivot tubes provide extreme resistance to wear and are twice the thickness of our our standard pivot tubes provided with the kit. Your dueling tree will get a lot more life from the additional strength of the thicker walled pivot tubes. Well worth the upgrade!Recommendations: When building your tree, we recommend purchasing 1.5″ angle iron in .25 thickness. The height of the tree is up to you. Also, when welding the angle iron to the base, always have the top of the angle iron leaned toward the shooter, with the “V” facing the shooter as well (to protect the pivot tube). This way gravity will keep the targets to either the left or right position and you won't have to worry about them getting stuck.Don't forget to add our Multi-Purpose Base (MPB). The MPB is configured to accept the angle iron at a 22 degree lean. No guess work on how to set up your tree. Plus, the MPB can be used for ANY of our reactive target systems. Check it out! See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ IPSC 66% for Multi-Purpose Base Stand By popular demand, here you have it! We have added a regular 66% IPSC target for use with our patent-pending Multi-Purpose Base (MPB).So, if you have a MPB and you already own a reactive target system, this 66% IPSC target can be used and slid right in to the “throat” (the piece that holds your reactive target to the angle iron). If you don’t already have an MPB, please select “Add MPB and Throat” and we’ll ship everything out that you’ll need.We have angle iron as an option (in Replacements and Add Ons), but I suggest NOT buying it. The angle iron literally costs us about $7/piece, which is what you can source it locally for. The shipping is the killer, which is why we have to charge so much. You MUST use 1.5″ x .25 American-spec (standard type) angle iron. Available at most home improvement stores or any steel yard.This target is sure to provide hours of fun. It is a perfect training aid for the LEO, military sniper, or even just the weekend plinker.  This target is not going to score you chicks like our reactive target systems (because, well, they’re much cooler), but it will hone your shooting skills and the other guys at the range will have “man envy” for having such a nice, professional target system!Specs     3/8″ AR500 armored steel – engineered to last a lifetime     66% IPSC (approximately 12″ W x 19.5 H)     Safely defects frag towards the ground     Ships raw steel. Painted white in stock photo for reference only See A Comparison of Our Full Line Reactive Steel Targets on page 2:

The Target Man™ Multi-Purpose Base (MPB)The base comes with 4 legs and hair pins.A TTM original design! We’ve taken everything in to consideration while designing our patent-pending Multi-Purpose Base (MPB). The MPB was engineered with many different key factors. Here’s some benefits of our MPB…     Portable! The MPB was designed with collapsible legs for easy transport. The MPB is designed to fit in to the trunk of the smallest sedan!     Durable! The MPB is constructed from 3/8″ mild steel with an AR500 protector plate. The AR500 protector plate protects the base from errant shots.     Replaceable components! Should you have a stray bullet hit the base, we offer replacement legs!     Light Weight! Compared to other bases, our base weighs much less     Universal! Engineered to easily adapt to ALL of our target systems     Collapsible! With the pull of a few pins, the legs quickly pop off our target base. Assembly is just as easy!     Sturdy! You don’t have to worry about “wobble”. The MPB features 2 angle iron inserts. One insert ensures the angle iron is in the vertical position. The vertical position is for our reactive series targets. The angled position, which ensures the angle iron sits at an approximate 22 degree “lean” toward the shooter, ensures the correct angle when utilizing our dueling tree target systems. The only needed for the shooter to source would be the angle iron. We offer angle iron here under Replacements and Add Ons, but with the cost of shipping, you may want to consider sourcing it locally. Expect to pay $5-$10 for a piece of angle iron. This target system will ONLY work with Standard American (most common size) 1.5″ x .25″ angle iron. See A Comparison of Our Full Line Reactive Steel Targets on page 2:

Features:  Dimensions: 10” x 12” shooter cut Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor Single Curve Stab and Slash Resistant Kevlar lined to protect against spall and frag (optional) Durable and water resistant coating on plate Maintenance Free Thickness .25” Designed to be used as a front or back plate Lightweight Approximate Weight: 7.5 lb’s 100% Made in the USA Predator Armor Level III+ Shooters Cut Predator Armor Level III+ Body Armor is manufactured in the U.S. using ballistic grade steel and has the option for a kevlar lined spall and fragmentation protective layer. Our plates use a unique heat-treating, quenching and tempering process that results in an extra hardened steel. Predator Armor plates are lightweight, impact-resistant steel that hold superior ballistic properties. This allows us to use thinner plates without sacrificing protection levels. All of our plates come with a base coat that aesthetically enhances the plate as well as provides durable characteristics. This coating does not provide fragmentation mitigation. You have the option to add kevlar lining to your plate. This provides anti spall and frag characteristics. It also enhances the performance of your plate. If your carrier does not have anti frag characteristics it is strongly advised to include the kevlar lining. Features:  Dimensions: 10” x 12” shooter cut Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor Single Curve Stab and Slash Resistant Kevlar lined to protect against spall and frag (optional) Durable and water resistant coating on plate Maintenance Free Thickness .25” Designed to be used as a front or back plate Lightweight Approximate Weight: 7.5 lb’s 100% Made in the USA

Features:  Dimensions: 10” x 12” shooter cut Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor Single Curve Stab and Slash Resistant Kevlar lined to protect against spall and frag (optional) Durable and water resistant coating on plate Maintenance Free Thickness .25” Designed to be used as a front or back plate Lightweight Approximate Weight: 7.5 lb’s 100% Made in the USA Predator Armor Level III Shooters Cut Predator Armor Level III Body Armor is manufactured in the U.S. using ballistic grade steel and has the option for a kevlar lined spall and fragmentation protective layer. Our plates use a unique heat-treating, quenching and tempering process that results in an extra hardened steel. Predator Armor plates are lightweight, impact-resistant steel that hold superior ballistic properties. This allows us to use thinner plates without sacrificing protection levels.  Our ballistic steel plate is tested to NIJ standards. All of our plates come with a base coat that aesthetically enhances the plate as well as provides durable characteristics. This coating does not provide fragmentation mitigation. You have the option to add kevlar lining to your plate. This provides anti spall and frag characteristics. It also enhances the performance of your plate. If your carrier does not have anti frag characteristics it is strongly advised to include the kevlar lining. Features:  Dimensions: 10” x 12” shooter cut Outlasts Ceramic, Dyneema, and UHMWPE constructed body armor Single Curve Stab and Slash Resistant Kevlar lined to protect against spall and frag (optional) Durable and water resistant coating on plate Maintenance Free Thickness .25” Designed to be used as a front or back plate Lightweight Approximate Weight: 7.5 lb’s 100% Made in the USA Our Testing Target is a smaller cut from the same material as the Level III Plates. It is an add on item you can order with your plates and test the body armor out for yourself. We guarantee our plates will meet the Level III standards. Add a test plate to your order and try it yourself. If it does not meet the standards we will refund your order.

Fixed Target Stand (2) 4" x 3/8" Carriage Bolts (4) 3" x 3/8" Carriage Bolts (6) 3/8" Flat Washers (6) 3/8" Lock Washers (6) 3/8" Wingnuts (2) Rubber Grommets (2) Stand Legs(2) Stand Leg Braces(1) Target Mounting Bracket Hanging Target Stand (12) 3" x 3/8" Carriage Bolts (12) 3/8" Flat Washers (12) 3/8" Lock Washers (12) 3/8" Wingnuts AR500 Armor Target Stand Kit Fixed Target Stand Our Fixed Target Stand was created from the get-go with the customer in mind. Simply provide your own 2 x4, cut to the length of your preference at your local home improvement store, assemble, and enjoy! Designed to bring you the best value, our Fixed Target Stand, will mount any of our 1/2" steel targets. However, please note, you are responsible for the safe and proper use of your stand. Should any components become damaged, you must absolutely replace them. Hardware Included (2) 4" x 3/8" Carriage Bolts (4) 3" x 3/8" Carriage Bolts (6) 3/8" Flat Washers (6) 3/8" Lock Washers (6) 3/8" Wingnuts (2) Rubber Grommets (2) Stand Legs(2) Stand Leg Braces(1) Target Mounting Bracket Hanging Target Stand Our Hanging Target Stand Kit comes with all of the hardware you need to construct your own hanging target stand. The Hanging Target Stand kit was designed to be customizable, affordable, and easy to assemble. All you need is 2 x 4 wood cut to whichever lengths you prefer to create the ideal stand size for your needs. Capable of supporting the weight of multiple targets!Please note, you will need to supply your own 2 x 4 wood. Most local home improvement stores will cut the wood to your specifications upon request. You will be required to drill the holes necessary for mounting the construction brackets, on 2 x 4 pieces of wood. Note: The hanging target stand requires hardware (sold separately) to mount hanging targets.Hardware Included: (12) 3" x 3/8" Carriage Bolts (12) 3/8" Flat Washers (12) 3/8" Lock Washers (12) 3/8" Wingnuts

SPECIFICATIONS Contents: Six 8” AR550 steel armor gongs Six target hangers Two sawhorse leg brackets (mild steel) Weight: 45.6 pounds, including storage bucket Minimum safe shooting distance: Handgun 10 yards (9.14m) / Rifle 100 yards (91/4m) AR500 Armor Target in a Pail The AR500 Armor® TMG Target Systems Target in a Pail is a portable plate target system you can take nearly anywhere.  Plate rack fun without the plate rack size When a full-size plate rack is impractical or unaffordable, the Target in a Pail system provides you with all the hardware you need to create your own rack target setup: gongs, hangers, and leg brackets. All you need to supply are the 2”x4” boards for the legs and crossbeam. We recommend 48” length for the legs and 96” or longer for the cross-member. This puts the rack at a comfortable height and provides enough space between the endplates and the legs to reduce the change of the legs being shot by errant rounds, especially as distances to target become longer.  SPECIFICATIONS Contents: Six 8” AR550 steel armor gongs Six target hangers Two sawhorse leg brackets (mild steel) Weight: 45.6 pounds, including storage bucket Minimum safe shooting distance: Handgun 10 yards (9.14m) / Rifle 100 yards (91/4m)

Benefits Level III rifle rated for 7.62x51 M80 Ball (.308 win) @ 2,780 fps Independently tested to NIJ 0101.06 Level III+ and III+ Lightweight are rated for 5.56mm M193 ammo at 3,100 fps Level III 6” X 8” Side Plate – 3.5 pounds (± 10% for our FragLock coating) Level III+ 6x8 -  3.5 pounds (± 10% for our FragLock coating) Level III+ LW - 2.5 pounds (± 10% for our FragLock coating) Most independently reviewed and tested body armor in the world AR500 Armor® high hard specially treated ballistic steel core construction Rigorous quality control standards for consistency and performance Rugged and stress fracture resistant A minimally invasive forming process on Multi-Curved models preserves armor integrity 20-Year maintenance-free shelf life Unparalleled Multi-Hit and stand-alone performance Outlasts Ceramic, and Polyethylene Body Armor Made in the United States of America! AR500 Armor Hard Side Plate AR500 Armor® Side Body Armor is designed to be worn in side plate pouches that attach to a plate carrier system. Our 6"x8" side plates fit most side plate pockets and MOLLE pouches on the market. All AR500 Armor® Body Armor is 100% made in the USA and manufactured from our rugged and reliable ballistic core designed specifically for Armor applications. Side protection for when it counts Specifically designed to increase coverage on the peripherals of your plate carrier. AR500 Armor® Level III Side Armor Plates offer rifle-rated protection on the side of your plate carrier. Compatible with most plate carriers that include cummerbund mounted side plate pouches. Comes standard in the flat base coat configuration, with multi-curve and our proprietary FragLock build-up spall and frag mitigation coat available at a slight additional cost. Level III is rated to defeat 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 feet per second, and Level III+ and III+ Lightweight are rated for 5.56mm M193 ammo at 3,100 fps. Side plates are most applicable when increased armor coverage is desired from an entry or defensive standpoint. Non-squared-off shooting positions, traveling in vehicles, and situations, where fragmentation is a realistic threat, are scenarios where heavily running side body armor makes sense. Also good for trauma plates/speed plates When used with our Adaptive Plate Insert in conjunction with soft armor, our 6"x8" plates can be used as a rifle-rated trauma/speed plate, offering enhanced protection for your heart. Benefits Level III rifle rated for 7.62x51 M80 Ball (.308 win) @ 2,780 fps Independently tested to NIJ 0101.06 Level III+ and III+ Lightweight are rated for 5.56mm M193 ammo at 3,100 fps Level III 6” X 8” Side Plate – 3.5 pounds (± 10% for our FragLock coating) Level III+ 6x8 -  3.5 pounds (± 10% for our FragLock coating) Level III+ LW - 2.5 pounds (± 10% for our FragLock coating) Most independently reviewed and tested body armor in the world AR500 Armor® high hard specially treated ballistic steel core construction Rigorous quality control standards for consistency and performance Rugged and stress fracture resistant A minimally invasive forming process on Multi-Curved models preserves armor integrity 20-Year maintenance-free shelf life Unparalleled Multi-Hit and stand-alone performance Outlasts Ceramic, and Polyethylene Body Armor Made in the United States of America!

SPECIFICATIONS Material: Ballistic steel of 650 hardness on the Brinell scale, with FragLock™ Coating Protection: 5.56x45 M193, 5.56x45 M855/SS109 at 3,100 FPS (+/- 30FPS), 7.62x51 M80 Ball (ie .308) at 3,000 FPS (+/- 30FPS), and DEA Certified FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10"x12" Base Coat Weight: 8 lbs Thickness: 0.31" Build-Up Coat Weight: 9.5 lbs Thickness: 0.56" 11”x14” Base Coat Weight: 10 lbs Thickness: 0.31" Build-Up Coat Weight: 11.5 lbs Thickness: 0.56" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States AR500 Armor Level III+ Body Armor With Build Up Coat The Level III+ Steel Plate (specifications below) is able to stop threats such as 7.62x39/7.62x51/5.56 M193s, 5.56 M855 penetrators, and .223/.308 WIN rounds. And unlike ceramic or polyethylene, Steel is able to take several hits from these rounds without fail. This multi-hit special threat resistance is the distinguishing quality of the Level III Plus. The plate features our patented Advanced Shooter Cut, which improves comfort and shooting ergonomics by affording you extra room for your rifle cut. It is available in both right and left-handed versions and is compatible with all standard plate carriers that accept SAPI or traditional Shooters Cut body armor (given you have an appropriate carrier size).  The included FragLock™ Coat is a feature special to our AR500 Armor plates, which we apply for two reasons: First, it helps reduce the dangers of spalling (when broken pieces of steel come off the plate) and fragmentation (when a bullet’s remains bounce off the plate), protecting you from the aftermath of a bullet’s impact once it has been stopped. Second, the coat gives our plates a maintenance-free shelf life of twenty years, which makes this steel plate last much longer than polyethylene or ceramic alternatives. The Base Coat, which all our plates come with by default, is lighter and thinner with less protection, while the Build-Up Coat can be added for greater protection but also slightly more weight. SPECIFICATIONS Material: Ballistic steel of 650 hardness on the Brinell scale, with FragLock™ Coating Protection: 5.56x45 M193, 5.56x45 M855/SS109 at 3,100 FPS (+/- 30FPS), 7.62x51 M80 Ball (ie .308) at 3,000 FPS (+/- 30FPS), and DEA Certified FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10"x12" Base Coat Weight: 8 lbs Thickness: 0.31" Build-Up Coat Weight: 9.5 lbs Thickness: 0.56" 11”x14” Base Coat Weight: 10 lbs Thickness: 0.31" Build-Up Coat Weight: 11.5 lbs Thickness: 0.56" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States

SPECIFICATIONS Thickness: 0.5" steel Note: Our targets are manufactured to accept 3/8 inch carriage bolts AR500 Armor® 1/2" Steel Target - Silhouette AR500 Armor® is proud to offer our AR500 Armor® Steel Targets for sale. AR500 Armor® provides consumers access to the best Steel Targets made of quality ½” steel. These steel targets were built from the ground up to be an affordable and dependable option for serious and casual shooters alike. The AR500 Armor® silhouette target is essential for shooters looking to enhance their tactical shooting skills on a realistic target. All of the AR500 Armor® Steel Targets are manufactured in the USA and meet strict quality control guidelines, making AR500 Armor® your #1 choice when you’re looking for steel silhouette targets for sale. Whether you are looking for steel targets shaped like gongs, silhouettes, or something a little different, all of our steel targets are rated to handle even the heaviest of common firearm calibers. These ½” AR500 Armor® Steel Plate Targets are rated for use with the most common pistol calibers at a distance of no less than 7 meters and the most common rifle calibers at a distance of no less than 50 meters. We strongly discourage the use of steel core ammunition. As always, be safe out there, always be situationally aware, and understand that spall and frag are always a danger with uncoated ballistic steel targets. Respect your distances and your aim points. SPECIFICATIONS Thickness: 0.5" steel Note: Our targets are manufactured to accept 3/8 inch carriage bolts

SPECIFICATIONS Material: Polycarbonate frames & triacetate cellulose (TAC) polarized lenses Protection: block 100% of harmful UV rays and meet ANSI Z87.1 impact resistance standards AR500 Shooting Glasses If you’re looking for tactical shades that are both stylish and affordable, look no further. Fashionable affordable eye protection Our Shooting Glasses are designed for both fashion and function. With 1.1mm Triacetate Cellulose (TAC) polarized lenses, our shooting glasses offer superior visual clarity and block out 100% of all harmful UVA, UVB, and UVC rays, up to 400 nanometers. The hard-coated, scratch-resistant lenses are lightweight and impact-resistant and meet all ANSI Z87.1 standards. The polycarbonate frames have more than four times the impact resistance of fiberglass and have a tensile strength of 900 pounds per square inch (compared to fiberglass at 200 psi). Our Shooting glasses come with a zippered case and microfiber cleaning cloth. SPECIFICATIONS Material: Polycarbonate frames & triacetate cellulose (TAC) polarized lenses Protection: block 100% of harmful UV rays and meet ANSI Z87.1 impact resistance standards

AR500 Phoenix 2.0 Armored Backpack The AR500 Armor® Phoenix armored backpack is a functional pack you can take practically anywhere and which will stop 95% of the rounds used in shooting incidents.   Highlights Confidence: stops bullets used in 95% of gun-related homicides Discreet: multiple low-profile colors available  Peace of mind: protect the entire family Features Durable zippers with Hypalon® pull tabs Padded rear backing for comfort, and padded fully adjustable backpack straps. High traction Hypalon bottom is abrasion and water-resistant Compartments & pockets Large Main Pocket size: 18”x13”x9" (with laptop sleeve) Medium Front pocket size: 10”x10” Small pocket Size: 6”x10” Integrated Body Armor: Level IIIA integrated soft armor: Rated to defeat 6 rounds of .44 Magnum, and .357 Sig at 1,430 feet per second Protective and lightweight anti-microbial and water-resistant rip-stop laminate cover  Backpack + 10"x12” Armor: Less than 3lbs Shelf life: 5 years Level III+ Lightweight integrated steel armor: Rated to defeat calibers up to 5.56x45 M193, 5.56x45 M855/SS109 at 3,000 FPS (+/- 30FPS) and 7.62x39, 7.62x51 NATO Backpack + 11"x15” steel armor (base coat): 9.9 lbs Shelf life: 20 years Pistol Rated - Built-In Body Armor Rifle Rated - Built-In Body Armor AR500 Armor Phoenix Armored Backpack Looking for a functional item you can take practically anywhere and which will stop 95% of the rounds used in shooting incidents? Look no further than the AR500 Armor® Phoenix armored backpack. Discreet protection, always available The Phoenix Armored Backpack is built to stop the bullets used in 95% of gun-related homicides. Nobody will know your backpack doubles as a lifesaving tool. The Phoenix is a low-profile armor system designed to stop the ammunition used in the majority of shootings.  The Phoenix weighs less than 3 pounds in its lightest configuration and comes ready to use. The armor is sewn into the pack, so you never have to worry about forgetting to install your armor or having it shift during use. The generously sized primary compartment features a laptop sleeve, compatible with nearly all laptops. The front pocket is large and includes a key lanyard with hook and retention pockets for pens and other accessories. The flat front-facing pocket is low profile and can accommodate a full-sized pistol for concealment.  Highlights Confidence: stops bullets used in 95% of gun-related homicides Discreet: multiple low-profile colors available  Peace of mind: protect the entire family Features Durable zippers with Hypalon® pull tabs Padded rear backing for comfort, and padded fully adjustable backpack straps. High traction Hypalon bottom is abrasion and water-resistant Compartments & pockets Large Main Pocket size: 18”x13”x9" (with laptop sleeve) Medium Front pocket size: 10”x10” Small pocket Size: 6”x10” Integrated Body Armor: Level IIIA integrated soft armor: Rated to defeat 6 rounds of .44 Magnum, and .357 Sig at 1,430 feet per second Protective and lightweight anti-microbial and water-resistant rip-stop laminate cover  Backpack + 10"x12” Armor: Less than 3lbs Shelf life: 5 years Level III+ Lightweight integrated steel armor: Rated to defeat calibers up to 5.56x45 M193, 5.56x45 M855/SS109 at 3,000 FPS (+/- 30FPS) and 7.62x39, 7.62x51 NATO Backpack + 11"x15” steel armor (base coat): 9.9 lbs Shelf life: 20 years Pistol Rated - Built-In Body Armor Rifle Rated - Built-In Body Armor  

Size: 2" x 5.5" Features: Includes (2) Shoulder Pads Compact and low profile design Compatible with up to 2" shoulder straps 1000D Nylon Construction Moisture-wicking and anti-microbial padded mesh Durable Velcro wrap-around closure flap holds pad securely in place Two modular attachment points 100% made in the USA! AR500 Armor Shoulder Pads Shoulder Pads (Pair) Constructed from 1000D Nylon we use a durable wrap-around Velcro closure flap to secure the shoulder pad in place. Our padded mesh fabric is both antimicrobial and moisture-wicking to improve comfort and airflow. Two modular straps act as guides or attachment points for accessories such as radios, hydration tubes, and/or Grimlock's and D-Rings. Compatible with up to 2" shoulder straps. (Includes 2 Shoulder Pads) Size: 2" x 5.5" Features: Includes (2) Shoulder Pads Compact and low profile design Compatible with up to 2" shoulder straps 1000D Nylon Construction Moisture-wicking and anti-microbial padded mesh Durable Velcro wrap-around closure flap holds pad securely in place Two modular attachment points 100% made in the USA!

Belt Size & Rows of Molle: Small: 27–31 in (69-79 cm) - 6 molle rows on each of the three sections Medium: 31–35 in (79-89 cm) - 6 molle rows on each of the three sections Large: 35–39 in (89-99 cm) - 8 molle rows on both the left and right side and 6 rows on the back X-Large: 39–43 in (99-109 cm) - 8 molle rows on both the left and right side and 6 rows on the back Features: The inner belt is 1.5” nylon webbing, and the duty belt is 2” SCUBA webbing for maximum stability. The 500D Cordura Outer Belt features two rows of PALS webbing for attaching MOLLE-compatible pouches and accessories.  Small and Medium: 6 columns on each of the three sections, for 18 total. Large and XL: 8 columns on each left and right side section, and 6 on the rear section, for 22 total PALS channels. ITW-Nexus buckles and molded hardware 3-point release safety lock buckle on Duty Belt for maximum security Highlights: Durable: quality materials like genuine Cordura® nylon, Velcro®, and ITW-Nexus buckle  Modular: Three-piece system works as a lone duty belt, full-on war belt, or simple pants belt Expandable: generous PALS webbing for MOLLE-compatible  AR500 Armor AR Battle Belt Carrying first-line gear comfortably and securely has always been the goal of belt system users, and the Armored Republic® AR Battle Belt™ meets and exceeds that goal. Three-piece modular system Available in four sizes and colors, the AR Battle Belt consists of three parts working together as a system for carrying your first-line loadout, from handgun or rifle magazine pouches and first aid kits, to dump pouches and other MOLLE-compatible accessories. The first part is the Inner Belt, which is worn through your belt loops and is covered with hook and loop material, allowing it to attach to the Duty Belt.  The Duty Belt is made of durable 2” SCUBA webbing, and securely holds your handgun, reloads, or other standard duty loadouts.  The third part of the AR Battle Belt consists of the removable PALS-covered Outer Belt, which slides onto the Duty Belt like a sleeve. These components allow for multiple configurations, making it adaptable to your needs. Together, they create a scalable yet affordable gun belt system. Belt Size & Rows of MOLLE: Small: 27–31 in (69-79 cm) - 6 MOLLE rows on each of the three sections Medium: 31–35 in (79-89 cm) - 6 MOLLE rows on each of the three sections Large: 35–39 in (89-99 cm) - 8 MOLLE rows on both the left and right side and 6 rows on the back X-Large: 39–43 in (99-109 cm) - 8 MOLLE rows on both the left and right side and 6 rows on the back Features: The inner belt is 1.5” nylon webbing, and the duty belt is 2” SCUBA webbing for maximum stability. The 500D Cordura Outer Belt features two rows of PALS webbing for attaching MOLLE-compatible pouches and accessories.  Small and Medium: 6 columns on each of the three sections, for 18 total. Large and XL: 8 columns on each left and right side section, and 6 on the rear section, for 22 total PALS channels. ITW-Nexus buckles and molded hardware 3-point release safety lock buckle on Duty Belt for maximum security Highlights: Durable: quality materials like genuine Cordura® nylon, Velcro®, and ITW-Nexus buckle  Modular: Three-piece system works as a lone duty belt, full-on war belt, or simple pants belt Expandable: generous PALS webbing for MOLLE-compatible 

Highlights Safety: securely holds your tourniquet in place for when you need it Versatile: mounts to cummerbund flap, kangaroo pocket opening, or almost anywhere two Velcro surfaces meet Low profile: 2” wide elastic loop sewn to 4” x 4” Velcro Peace of mind: easy to use and made of military-grade Velcro and elastic AR500 Armor AR Tourniquet Holder In an emergency, having the right medical training and equipment can be the difference between life and death. Tourniquets are a proven way to treat severe bleeding in an extremity, especially if conditions do not permit trying more the more traditional direct pressure first. AR500 Armor carries a variety of tourniquets to choose from, but the best tourniquets and training will do you no good if you can’t quickly access your tourniquet when you need it. That’s where our Tourniquet Holder comes in. Ready to deploy Made of heavy-duty Velcro and elastic webbing, the AR Tourniquet Holder is a convenient way to utilize Velcro connections on your plate carrier to affix a tourniquet without using up MOLLE real-estate for a pouch. The body of the Tourniquet Holder consists of a 4” square of Velcro that attaches between two layers of Velcro, such as where the cummerbund flap closes onto the cummerbund, an admin or kangaroo pouch opening, or in the opening of the plate pocket. The tourniquet itself is held by 4” wide heavy-duty elastic that’s sewn to the Velcro base. Together they combine to create a versatile and secure method of carrying a tourniquet that you can deploy at a moment’s notice. Highlights Safety: securely holds your tourniquet in place for when you need it Versatile: mounts to cummerbund flap, kangaroo pocket opening, or almost anywhere two Velcro surfaces meet Low profile: 2” wide elastic loop sewn to 4” x 4” Velcro Peace of mind: easy to use and made of military-grade Velcro and elastic

Compatible w/ most pistol magazines Universal fitment design Adjustable hook & loop flap Elastic retention keeper Converts to open-top configuration Stores up to 2x pistol magazines MOLLE compatible for attachment Imported Specifications Overall dimension: 5"H x 4"W x 1"D Two pistol mags Features of DOUBLE PISTOL MAG POUCH Compatible w/ most pistol magazines Universal fitment design Adjustable hook & loop flap Elastic retention keeper Converts to open-top configuration Stores up to 2x pistol magazines MOLLE compatible for attachment Imported Specifications Overall dimension: 5"H x 4"W x 1"D Two pistol mags

Adjustable hook & loop flap AR/M4 Mag compatible MOLLE compatible Imported Specifications Overall dimension: 7.25"H x 10.5"W x 2"D Mag Capacity: Up to six AR/M4 mags (not included) Features of Triple M4 Mag Pouch Adjustable hook & loop flap AR/M4 Mag compatible MOLLE compatible Imported Specifications Overall dimension: 7.25"H x 10.5"W x 2"D Mag Capacity: Up to six AR/M4 mags (not included)

Features of M14 MAG POUCH M14 mag compatible Adjustable hook & loop flap MOLLE compatible Imported Specifications Overall size: 6"H x 3.5"W x 2.25"D Mag Capacity: Two M14 mags