Body Armor Kits

The Ghost Concealment Shirt provides discreet level IIIA protection against handgun threats up to .44 MAG SJHP and .357 SIG. This concealable body armor package provides front, back and side protection in a slim profile that is virtually undetectable under a loose shirt or jacket.This package comes with:- Ghost Concealment Shirt (your size of choice S, M, L, XL, XXL)- 2 Qty: 10"x12" Level IIIA Flexed Fused Core™ Soft Armor Panels- 2 Qty: 5"x7" Level IIIA Flexed Fused Core™ Soft ArmorSide PanelsShirt sizing is very similar to men's collared shirts. If you're looking for a tight fit then consider going down 1 size.*THIS PACKAGE IS SOLD AS IS, NO RETURNS OR EXCHANGES* SPARTAN ARMOR SYSTEMS® Ghost Concealment Shirt for Flex Fused Core™ IIIA Soft Armor  Product Overview   The Ghost concealment shirt extends your Everyday Carry (EDC) capabilities by providing 4 zones of level IIIA ballistic protection. Our Flex Fused Core IIIA™ soft armor panels fit discreetly into front, back and side pockets sewn directly into the Ghost Concealment Shirt. This allows the Ghost Concealment Shirt to be worn covertly under loose clothing with little to no “printing”, or visible outlines on top layers of clothing.   Designed for Everyday Protection   Whether you’re out on the street, at work, school, etc. there are increasingly fewer opportunities to protect yourself. The Ghost Concealment Shirt and our Flex Fused Core™ IIIA soft armor provides protection against handgun threats up to .44 Magnum SJHP and .357 SIG FMJ. For maximum ballistic coverage, we include two 10”x12” front and back panels as well as two 5”x7” side panels with each order. Made of a breathable lightweight fabric similar to an athletic jersey, the Ghost Concealment Shirt is designed to be comfortable even when worn for long periods of time. When it’s time to wash the shirt, it’s as simple as removing the IIIA soft armor panels and placing the Ghost Concealment Shirt in your washing machine and it is machine dryable as well.   Low profile design minimizes printing when worn under loose clothing  Made of breathable materials designed to stay cool  Available in S, M, L, XL and XXL  Holds 10”x12” front/back armor panels and 5”x7” side panels  Machine washable (use delicate/low cycles)  Flex Fused Core™ IIIA Soft Armor provides .44 MAG SJHP and .357 SIG FMJ protection  Flex Fused Core™ IIIA Soft Armor is made in USA, manufactured in Tucson, AZ  Available in black, black & grey and black with black/grey camo   SPARTAN ARMOR SYSTEMS® FLEX FUSED CORE™ IIIA SOFT BODY ARMOR  Product Overview  Spartan Armor Systems® listens to their customer base, and we answered the call when it came to developing and producing superior pistol-rated level IIIA soft body armor. According to 2019 DOJ crime statistics, 17x more homicides are committed with handguns versus rifles. With crime and homicides on the rise in many major cities, level IIIA soft body armor has become more relevant than ever. The Spartan Armor Systems®™ Flex Fused Core™ Soft Armor is extremely low profile, flexible, comfortable, and easy to wear. Composed of only the best American-made materials and proudly assembled in our state-of-the-art facility in Tucson, Arizona. If you’re looking for discreet protection against handgun threats, Flex Fused Core™ IIIA Soft Armor is an affordable solution made with the highest quality standards. Comfortable, Concealable, Effective Spartan Armor Systems® Flex Fused Core™ has been tested by an independent NIJ credentialed laboratory to verify that it meets NIJ level IIIA specifications, which means it will stop .44 MAG SJHP, as well as being Special Threat Rated to stop.357 SIG FMJ impacts. This soft armor is also multi-hit rated and is capable of stopping up to 6 rounds. The low-profile nature of the armor combined with the superior standards in quality control and production ensure that Spartan Armor Systems®™ Flex Fused Core™ Soft Armor IIIA Soft Body Armor will remain as rugged, durable, and effective as it is comfortable. This is a fantastic option for those seeking to use the Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor in discrete environments, or for those looking to enhance any of their Spartan Armor Systems® hard armor products.  Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor Specs:  Tested And Passed In Accordance With NIJ-std-0101.06 / MIL-STD-662F Rated To Stop .44 MAG SJHP, As Well As Special Threat Rated To Stop .357 Sig FMJ Multi-hit Rated To Stop 6 Rounds This Soft Armor Can Be Used Stand-alone, Giving Level IIIA Protection Or ICW (In Conjunction With) As A Backer On Any Of Hard Armor Systems All Parts Of This Product Are Proudly American Made .35" Profile 10" X 12" Panel: Weight 1.14 Lb Made In U.S.A.

Qualities of VIP T-Shirt Concealable Enhanced Multi-Threat NIJ Certified Ballistics Multi-Threat Protection Maximum Concealment Super Lightweight All-Day Comfort Stretch Compression Material Overlapping Side Coverage Available in Light, Lighter, & Lightest Options Arrives in 2-7 Business Days Easily Washable What’s Included VIP Concealable T-Shirt Carrier Set (2) of Certified Level IIIA Soft Armor Inserts Lighter IIIA+ Special Threat ProtectionV50 - 2gr RCC 3060 ft/s (932m/s)V50 - 4gr RCC 2642 ft/s (805m/s)V50 - 16gr RCC 2244 ft/s (684m/s)V50 - 17gr FSP (.22cal) 2017 ft/s (615m/s)V50 - 64gr RCC 1866 ft/s (569m/s)V50 – 9mm 127gr SXT (new) 1754 ft/s (534m/s)P-BFS Avg. – 9mm 127gr SXT 24.6 mmP-BFS Avg. – 40cal 165gr S+W Sp GDHP 27.2 mmP-BFS Avg. – 5.7x28 27gr SS195 17 mmP-BFS Avg. – 5.7x28 27gr SS197 19.3 mm Lightest IIIA+ Special Threat ProtectionV50 - 2gr RCC 2918 fps (890 m/s)V50 - 4gr RCC 2553 fps (778 m/s)V50 - 16gr RCC 2124 fps (647 m/s)V50 - 17gr FSP (.22cal) 2006 fps (611 m/s)V50 - 64gr RCC 1809 fps (551 m/s)V50 – 9mm 127gr SXT 1755 fps (535 m/s)P-BFS Avg. – 9mm 127gr SXT 29 mmV50 – 40cal 165gr GDHP NA - Testing Terminated Due to Velocity LimitationP-BFS Avg. – 40cal 165gr GDHP 29 mmV50 – 5.7x28mm 27gr SS195 HP 2422 fps (738 m/s)P-BFS Avg. – 5.7x28mm 27gr SS195 HP 17 mm VIP T-Shirt Concealable Enhanced Multi-Threat The VIP Concealable T-Shirt Multi-Threat Vest provides covert all-day comfort to make it the most progressive concealable armor on the market. Super lightweight design, stretch compression material, and maximum versatility make this “vest” extremely popular with security personnel, public safety officers, and private citizens looking for dependable everyday gear.   This vest includes NIJ Certified armor with front and back armor inserts capable of stopping all common handgun rounds including .357, 9MM, 45ACP, and 44 Magnum bullets. With full wrap-around protection, this armor performs up to Level IIIA+ for Special Threat Attacks. When you need body armor that you can wear all day, the VIP Concealable T-Shirt is the perfect carrier for you.  Qualities of VIP T-Shirt Concealable Enhanced Multi-Threat NIJ Certified Ballistics Multi-Threat Protection Maximum Concealment Super Lightweight All-Day Comfort Stretch Compression Material Overlapping Side Coverage Available in Light, Lighter, & Lightest Options Arrives in 2-7 Business Days Easily Washable What’s Included VIP Concealable T-Shirt Carrier Set (2) of Certified Level IIIA Soft Armor Inserts ➠ View Ballistics Test Report➠ View Ballistics Specification➠ View Compliance Letter ➠ VIP T-Shirt Carrier  Specifications Size Light (.35”) Lighter (.25”) Lightest (.21”) Sq. Inches of Ballistics Small 5.6 lbs 4.3 lbs 3.1 lbs 374” Medium 6.2 lbs 4.7 lbs 3.4 lbs 421” Large 6.5 lbs 5.0 lbs 3.6 lbs 447” XL 6.9 lbs 5.3 lbs 3.8 lbs 481” 2XL 7.2 lbs 5.5 lbs 4.0 lbs 504” 3XL 8.2 lbs 6.3 lbs 4.5 lbs 588” 4XL 8.7 lbs 6.7 lbs 4.8 lbs 631” 5XL 9.8 lbs 7.5 lbs 5.4 lbs 707” Lighter IIIA+ Special Threat Protection V50 - 2gr RCC 3060 ft/s (932m/s)V50 - 4gr RCC 2642 ft/s (805m/s)V50 - 16gr RCC 2244 ft/s (684m/s)V50 - 17gr FSP (.22cal) 2017 ft/s (615m/s)V50 - 64gr RCC 1866 ft/s (569m/s)V50 – 9mm 127gr SXT (new) 1754 ft/s (534m/s)P-BFS Avg. – 9mm 127gr SXT 24.6 mmP-BFS Avg. – 40cal 165gr S+W Sp GDHP 27.2 mmP-BFS Avg. – 5.7x28 27gr SS195 17 mmP-BFS Avg. – 5.7x28 27gr SS197 19.3 mm Lightest IIIA+ Special Threat Protection V50 - 2gr RCC 2918 fps (890 m/s)V50 - 4gr RCC 2553 fps (778 m/s)V50 - 16gr RCC 2124 fps (647 m/s)V50 - 17gr FSP (.22cal) 2006 fps (611 m/s)V50 - 64gr RCC 1809 fps (551 m/s)V50 – 9mm 127gr SXT 1755 fps (535 m/s)P-BFS Avg. – 9mm 127gr SXT 29 mmV50 – 40cal 165gr GDHP NA - Testing Terminated Due to Velocity LimitationP-BFS Avg. – 40cal 165gr GDHP 29 mmV50 – 5.7x28mm 27gr SS195 HP 2422 fps (738 m/s)P-BFS Avg. – 5.7x28mm 27gr SS195 HP 17 mm

SPARTAN ARMOR SYSTEMS® "SPARTAN" SWIMMERS CUT PLATE CARRIER   Product Overview The Spartan Armor Systems® "Spartan" Swimmers Cut Plate Carrier is designed for use with our Swimmers Cut steel core armor: Spartan™ Omega™ AR500 and AR550. This minimalist “Spartan” carrier is designed for those seeking speed, agility, and ultimate maneuverability in their carrier. The Swimmers Cut Plate Carrier is adjustable from a Medium size to XL and can accommodate 6”x6” side plates in the cummerbund, should you desire to run it with enhanced side protection. Intended for highly active environments that require the wearer to remain nimble, this carrier is constructed of extremely durable 860 Denier poly construction, fits 10”x12” swimmers cut plates which provide coverage where you need it most, but reduces weight and allows for enhanced mobility by eliminating a small amount of plating from the shoulder regions. Don’t let the paired down design fool you though, this versatile and effective carrier affords a good degree of customization with PALS webbing on the front and back sides for the attachment of molle accessories and pouches, and velcro on front and back for patch placement and identifiers. If you’re looking for a versatile plate carrier that allows for a greater range of motion and mobility that won’t break the bank, the Spartan Swimmers Cut Plate Carrier is for you.   Spartan Armor Systems® “Spartan” Swimmers Cut Plate Carrier Specs: Lightweight Plate Carrier That Accepts Side Plates Designed For Spartan Armor Systems® 10" X 12" Swimmers Cut Steel Core Plates Adjustable From Medium To XL PALS Webbing On Front And Back For Versatility Velcro On Front And Back For Patch Placement Cummerbund Is Designed To Hold 6" X 6" Side Plates Comfortably Shoulder Pads Included 860 Denier Poly Construction Reinforced Drag Handle NOTE: This carrier is designed to fit swimmers cut plates manufactured by Spartan Armor Systems®. We can not guarantee a fit with plates made by other manufacturers.   SPARTAN™ OMEGA™ AR500 BODY ARMOR SWIMMERS CUT SET OF TWO   Product Overview Sleek, lightweight, and ready to move, the Swimmers Cut Spartan™ Omega™ AR500 Body Armor affords operators with increased mobility, a decrease in overall weight. The “Swimmers Cut” gets its name from the improved range of motion in the shoulders due to the angle of cut in the top corners of the plate. This allows for a lighter and less obstructive body armor plate while still providing coverage for vital organs. Swimmers Cut Spartan™ Omega™ AR500 Body Armor is constructed from lab certified AR500 ballistic grade steel, (¼” thickness) and these body armor plates provide the operator with Level III protection in accordance with NIJ0101.06 standards. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. When the environment dictates speed and mobility as primary and critical factors, the Spartan omega AR500 Body Armor Swimmers Cut Plates are an excellent choice.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation.   Exceptional Comfort & Engineering You have the choice of getting our AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved AR550 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.  Chest Plate Weight (per plate):  10x12 Plate: Base Coat 7lbs 7oz. Full Coat 8lbs 1oz. Side Plate Weight (per plate):  6×6 approximately 2lbs 1oz (base coat) or 2lbs 15oz (full coat) 6×8 approximately 3lbs 10oz (base coat) or 3lbs 14oz (full coat)    Spartan™ Omega™ AR500 Body Armor Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.   *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.  

Shellback Tactical Patriot Active Shooter Kit with Level IV 1155 Plates The Shellback Tactical Patriot Active Shooter Kit with Level IV 1155 Plates is your complete ballistic solution for active shooter preparation and response. This kit provides law enforcement and first responders protection against hand gun and rifle rounds.  Kit Components Shellback Tactical Patriot Plate Carrier x 1 Shellback Tactical Prevail 1155 Level IV 10 x 12 Hard Armor Plates x 2 Patriot Plate Carrier Features  500 Denier Cordura Nylon  Lightweight adjustable space mesh shoulder pads Super lightweight - 1.5LBS  Low profile design for mobility  Fully adjustable shoulder straps to fit most sizes  Fully adjustable cummerbund to fit most sizes  Loops panels on front and back for ID placards  Heavy duty par tacking at key stress points  Fits 10 x 12 shooter cut plates  GSA Compliant  TAA Compliant  Level IV 1155 Plate Features NIJ 0101.06 Certified Meets level IV standards   10" W x 12" L x 1"D Weight - 8.3lbs  SAPI Cut  Made of Monolithic ceramic and polyethylene  Made in the USA  10 Year warranty on ballistics  Stopping Power  .357 SIG FMJ 9MM .38 40S&W .45 ACP .223 BALL  5.56 X 45  7.62 X 39 BALL  7.62 X 51 M80 NATO  M855/SS109 7.62 X 63 M2AP  Legal  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.     

The Shellback Tactical Rampage 2.0 Active Shooter Armor Kit with Level IV 1155 Plates is your ultimate armored kit solution to being prepared for an active shooter situation. This complete kit features our popular Rampage 2.0 plates carrier and two level IV model 1155 hard armor plates. Shellback Tactical Rampage 2.0 Active Shooter Kit with Level IV 1155 Plates  The Shellback Tactical Rampage 2.0 Active Shooter Armor Kit with Level IV 1155 Plates is your ultimate armored kit solution to being prepared for an active shooter situation. This complete kit features our popular Rampage 2.0 plates carrier and two level IV model 1155 hard armor plates. Stay protected and order your Shellback Tactical Rampage 2.0 Active Shooter Kit with Level IV 1155 Plates today! KIT COMPONENTS Shellback Tactical Rampage 2.0 Plate Carrier x 1 Shellback Tactical Prevail Series Model 1155 Level IV 10 x 12 Hard Armor Plate x 2  RAMPAGE 2.0 PLATE CARRIER FEATURES Constructed of durable 500 Denier Nylon  Front and rear plate pockets hold 10" x 12" shooter or SAPI cut ballistic plates  Laser cut Molle on front, rear and cummerbund to accessorize with pouches  Laser cut Molle loop panels on front and rear for ID placards  3D Spacer mesh padding on front, rear and shoulder pads for comfort  Removable front Molle placard  Cummerbund includes six integrated pockets with bungee retention for magazines or radios Cummerbund accepts 13.75" x 5.5" soft armor inserts  Rear drag handle Heavy duty bar tacking at key stress points Fully adjustable shoulder straps to fit most sizes   Fully adjustable cummerbund to fit most sizes  Lifetime Warranty  Imported  LEVEL IV MODEL 1155 PLATE FEATURES NIJ level IV threat protection NIJ 0101.06 certified and listed on NIJ CPL list Multi-Hit Rated Single Curve 10" x 12" SAPI cut  Weight - 8.2lbs  Stand alone protection 600 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing   Made in the USA  10 Year warranty  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP LEGAL  THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.

Leonidas Legend XL Limited Edition Black Multicam Plate Carrier - MADE IN USA   Product Overview  True to its lineage, the second-generation Leonidas plate carrier is designed to meet the most rigorous demands of the modern operator. Enhanced with lightweight Squadron laser-cut laminate material over a Cordura 500D body, the Leonidas Legend plate carrier is built to last. The Leonidas Legend features effective thin and lightweight high density foam standoffs for air circulation, enhanced shoulder pads, quick release cummerbund and many more upgrades.    Black Multicam & Blackout Edition The Leonidas Legend XL is a rugged, but lightweight carrier designed for larger body types ranging from Large to 3XL. This limited edition plate carrier is available in standard Black Multicam as well as a special "Blackout" edition which features black laser cut laminate Squadron over a Black MultiCam body. Both versions of the Leonidas Legend XL come with two sets of shoulder pads: 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing.   Built for Battle  With enhanced padding in the front, back and shoulders, the Leonidas Legend is designed to minimize fatigue and maximize comfort during extended duty use. The tough, but soft, spacer mesh helps this carrier breathe while facilitating heat dissipation. The fully adjustable (and removeable) cummerbund provides 7 levels of adjustment, allowing for a variety of body types ranging from L to 3XL. High abrasion laminate exterior panels not only provide a super low profile mounting solution but reduces weight while shielding the 500D Cordura body. The Leonidas Legend comes standard with mole side plate pouches capable of holding 6”x6” or 6”x8” armored side plates. Each shoulder pad also features multi-directional laser-cut webbing to allow for greater freedom in mounting and retainment options. First Spear Tubes are integrated into the cummerbund to allow for faster dawning and removal of the carrier. The top zippered admin pouch is capable of holding smartphones up to 6.5” long. Additional storage is also provided by way of the front kangaroo pouch which is retained by Velcro. The Leonidas Legend plate carrier is proudly made in the U.S.A. and 100% Berry Compliant making it an ideal choice for Law Enforcement, Military or Concerned Citizens alike.    Other Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch      SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SHOOTERS CUT SET OF TWO    Product Overview Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties.     Protective Value Added    We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.    Battle Hardened   Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.   Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.    Laser Cut to Protect Ballistic Integrity   All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.   IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.    Blazing The Trail of Innovation  Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!   Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Plate Weight (per plate):    9.5”x12.5” AR550 Shooters Cut Single Curve Full Coat = 9 lbs 5 oz.    Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness   Side Plate Weight (per plate):    6×6 approximately 2lbs 9oz (base coat), 2lbs 11oz (full coat), 6×8 approximately 3lbs 6 oz (base coat), 3lbs 12oz (full coat).    AR550 Body Armor - Shooters Cut Specs:   Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only       See a Comparison of Our Full Line of Body Armor:             Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:       Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.       The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.      

Spartan Armor Systems Active Shooter Kit With Level III+ AR550  Spartan Armor Systems AR550 Body Armor with Hydra Plate Carrier. This active shooter kit set up is designed to allow a quick response time and comfortable performance fit with superior Level III+ Rifle Rated Protection. Carrier includes emergency drag handle, quick cinch adjustments for the front and hook and loop adjustments on the shoulders. The Spartan Armor Active Shooter Kit is perfect for rapid response situations.  Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.  Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?  Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.   The Hydra Plate Carrier is a highly adaptable carrier ideal for quick deployment and emergency situations such as active shooter scenarios. Easily adjustable buckles ensure a snug and comfortable fit on the sides. Ample length shoulder straps allow the Hydra plate carrier to be easily adjusted to fit a wide variety of body types. Breathable mesh is used at chest, back and shoulder contact points to allow for maximum breathability. The Hydra plate carrier is a great choice for anyone looking for a lightweight and versatile body armor configuration. Front map pocket Emergency drag handle Removable padded mesh shoulder pads with hook and loop guides Adjustable shoulder straps Hook and loop webbing Heavyweight webbing for modular attachments Padded mesh interior lining Quick adjust cinches Quick release buckles Easy access plate pockets Waist Size: 30″ – 46″ adjustable sizing Accepts traditional Medium or Large SAPI plates up to 10.25″ x 13.25″. Best fit for our shooters cut and swimmers cut AR500 and AR550 body armor. This package includes our Level III+AR550 10x12 Armor. 1/4" thickness and provides the operator with Level III+ protection IAW NIJ0101.06 standards.      Our Level III+ AR550 Armor has been tested to go beyond the Level III testing protocol (6 shots .308/M80 Ball, 2780 fps).  Special Threat Ratings: SS109/M855 3505 fps 6 shots 30-06 up to 2,719 fps     With all of our AR550 Spartan Armor Systems™ products, we only use ballistic LAB CERTIFIED AR550! All purchases of our Spartan Armor products have current lab certificates and secondary ballistics available on request. Remember, not all body armor is created equal!  Coating Options:  Choose the Full Coat option to have the plate lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™.  The result is a plate approximately 1/2-5/8” total thickness.  See our FAQ for more information about our Encapsaloc ™ process. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities. To learn more check out our blog on the coating options: https://www.spartanarmorsystems.com/blog/encapsaloc-fragmentation-mitigation-antispall-body-armor-coating/   Chest Plate Weight (per plate): 10x12 AR500 Omega Armor Shooters Cut: Base Coat 8lbs 7oz. Full Coat 9lbs 3oz.      Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.         *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems AR500 Omega Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

Leonidas Legend XL Limited Edition Black Multicam Plate Carrier - MADE IN USA   Product Overview  True to its lineage, the second-generation Leonidas plate carrier is designed to meet the most rigorous demands of the modern operator. Enhanced with lightweight Squadron laser-cut laminate material over a Cordura 500D body, the Leonidas Legend plate carrier is built to last. The Leonidas Legend features effective thin and lightweight high density foam standoffs for air circulation, enhanced shoulder pads, quick release cummerbund and many more upgrades.    Black Multicam & Blackout Edition The Leonidas Legend XL is a rugged, but lightweight carrier designed for larger body types ranging from Large to 3XL. This limited edition plate carrier is available in standard Black Multicam as well as a special "Blackout" edition which features black laser cut laminate Squadron over a Black MultiCam body. Both versions of the Leonidas Legend XL come with two sets of shoulder pads: 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing.   Built for Battle  With enhanced padding in the front, back and shoulders, the Leonidas Legend is designed to minimize fatigue and maximize comfort during extended duty use. The tough, but soft, spacer mesh helps this carrier breathe while facilitating heat dissipation. The fully adjustable (and removeable) cummerbund provides 7 levels of adjustment, allowing for a variety of body types ranging from L to 3XL. High abrasion laminate exterior panels not only provide a super low profile mounting solution but reduces weight while shielding the 500D Cordura body. The Leonidas Legend comes standard with mole side plate pouches capable of holding 6”x6” or 6”x8” armored side plates. Each shoulder pad also features multi-directional laser-cut webbing to allow for greater freedom in mounting and retainment options. First Spear Tubes are integrated into the cummerbund to allow for faster dawning and removal of the carrier. The top zippered admin pouch is capable of holding smartphones up to 6.5” long. Additional storage is also provided by way of the front kangaroo pouch which is retained by Velcro. The Leonidas Legend plate carrier is proudly made in the U.S.A. and 100% Berry Compliant making it an ideal choice for Law Enforcement, Military or Concerned Citizens alike.    Other Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch      Spartan Armor Systems ® Hercules Level IV Ceramic Advanced Compound Curve Body Armor -  Set of Two Plates   Product Overview The Hercules level IV body armor plate is manufactured in-house at the Spartan Armor Systems® facility in Tucson, AZ utilizing ballistic ceramic and UHMWPE materials. As with all body armor manufactured by Spartan Armor Systems®, the Hercules level IV ceramic body armor plate has been independently tested and verified by an NIJ Certified laboratory. Each Hercules level IV body armor plate is rated to stop armor piercing rifle rounds up to .30-06 M2 AP. Weighing in at just 6.9 lbs per plate, the Hercules is noticeably lighter than most level IV ceramic body armor plates available. With full edge-to-edge 10”x12” coverage and Advanced Compound Curve design, the Hercules is ideal for operators in need of maximum protection and comfort.    Full Edge-To-Edge Protection Get what you pay for! It might not be obvious, but some 10”x12” level IV ceramic body armor plates on the market only provide protection in a 8”x10” area to keep manufacturing costs low. However, the Hercules ceramic body armor plate provides full 10”x12” edge-to-edge protection for the operator. When your life is on the line, don’t take chances with other ceramic plates that measure 10”x12”, but only provide an 8”x10” area of protection. Buy ceramic level IV body armor plates that give you the protection you’re paying for.     Advanced Compound Curve - True Multi-Curve Design The Hercules level IV body armor plate features our Advanced Compound Curve (ACC). While many body armor plates claim to be “multi-curve”, the ACC profile is a true multi-curve design providing the operator with the most comfortable fit of any ceramic level IV body armor plate. This advanced ergonomic design is especially important during extended duty engagements, typical of Law Enforcement, Security, and Military operations.   Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Ceramic & UHMWPE Plate Size: 10”x12” Protection Area: 10”x12” Weight: 6.9 lbs Thickness: 1.1” Plate Quantity: Two (2) Plates Included Curve Profile: Advanced Compound Curve Cut: SAPI/ESAPI (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Condura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ.   NOTE: Ceramic armor cannot be resold, therefore ALL sales for this product are final. No returns or exchanges accepted.

One size fits all Holds front and back 10" x 12" hard armor plates   Outer layer: beefy 500D solution dyed Cordura Reverse stitching is used wherever possible to enhance durability Carrier Weight: 2lbs, 3.2oz  WHAT IS INCLUDED: Plate Carrier 2 Qty. 10" x 12" as selected Victory Plate Carrier Introducing the all new Victory Plate Carrier from Body Armor Direct. This is a lightweight, rugged and cost effective plate carrier. The front of the carrier has a kangaroo pouch that holds magazine inserts or functions as a readily available admin pouch.  One size fits all Holds front and back 10" x 12" hard armor plates   Outer layer: beefy 500D solution dyed Cordura Reverse stitching is used wherever possible to enhance durability Carrier Weight: 2lbs, 3.2oz  WHAT IS INCLUDED: Plate Carrier 2 Qty. 10" x 12" as selected

Shellback Tactical Banshee Active Shooter Kit with IV 1155 Plates The Shellback Tactical Banshee Active Shooter Kit with Level IV 1155 Plates is a cost effective solution for active shooter preparation and response.  This kit provides protection against both hand gun and rifle rounds.  Kit Components  Shellback Tactical Banshee Rifle Plate Carrier® x 1 Shellback Tactical Prevail 1155 Level IV 10 x 12 Hard Armor Plates x 2  Banshee Rifle Plate Carrier® Features  Constructed of durable 500 Denier nylon  Holds 10 x 12 shooter or SAPI cut ballistic plates  Removable cummerbund with interior and exterior PALS for side plates Cummerbund accepts 13.75" x 5.5" soft armor inserts  Quick release secondary securing system Extreme versatility with PALS webbing attachment points covering the front, back and shoulders of the vest. Fully adjustable and padded front, back and shoulder areas. Two areas of loop on front and rear for id placards Front pocket accepts kangaroo inserts  Heavy Duty bar tacking at key stress points Wire, antenna or hydration hose guides Low profile design for mobility  Rear drag handle  Now approved with the Los Angeles Police Department (L.A.P.D.)- NTOA (NATIONAL TACTICAL OFFICER ASSOCIATION) APPROVED Lifetime warranty  GSA and TAA Compliant  Level IV 1155 Plate Features NIJ 0101.06 Certified  10" W x 12" L x 1"D Weight - 8.3lbs  SAPI Cut  Made of Monolithic ceramic and polyethylene  Made in the USA  10 Year warranty on ballistics  Stopping Power  .357 SIG FMJ 9MM .38 40S&W .45 ACP .223 BALL  5.56 X 45  7.62 X 39 BALL  7.62 X 51 M80 NATO  M855/SS109 7.62 X 63 M2AP  LEGAL THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

Shellback Tactical Banshee Elite 3.0 Active Shooter Kit with Level IV 1155 Plates  Kit Components  Shellback Tactical Banshee Elite 3.0 Plate Carrier x 1 Shellback Tactical Prevail Series Model 1155 Level IV 10 x 12 Hard Armor Plate x 2  Banshee Elite 3.0 Plate Carrier Features  Laser cut Molle platform on front, rear and cummerbund reduces weight and adds durability  Two quick release cummerbund buckles to quickly don and doff plate carrier  Rear drag handle extends up to 34 inches in length Constructed of durable 500 denier Cordura nylon Plate pockets load from the bottom hold 10 x 12 shooter or SAPI cut plates Two Shoulder buckles allow quick adjustments to raise or lower plate carrier for the perfect fit 3D Spacer mesh padding on front, rear and shoulder pads for ventilation and comfort Cummerbund features 6 integrated M4 magazine pockets Cummerbund features 2 pockets to insert Banshee Elite 3.0 soft armor panels  Cummerbund features interior laser cut Molle panels to attach side armor plate pockets Front zipper admin pouch for small field gear such as notepads, pens and multitools Rear hydration pocket holds 2L hydration bladder Integrated nylon vertical strips to accommodate QASM buckles for chest rigs  Loop panels on front and rear for ID placards  Lifetime warranty  Made in the USA  Berry Compliant  Banshee Elite 3.0 Sizing  Plate pockets load from the bottom and accept up to 10 x 12 shooter or SAPI cut plates  2 Shoulder buckles allow for quick adjustment to raise or lower plate carrier for the perfect fit  Cummerbund comes in 2 sizes  Small/Medium - 32 inches to 39 inches Large/XLarge - 39 inches to 46 inches  How to Select a Size  Measure the circumference of your body where the bottom of your plate would sit on your torso  Take the measurement and add 2 inches to get your final measurement  Use your final measurement to select from the sizing chart above  Level IV 1155 Plate Features NIJ level IV threat protection NIJ 0101.06 certified and listed on NIJ CPL list Multi-Hit Rated Single Curve 10" x 12" SAPI cut  Weight - 8.2lbs  Stand alone protection 600 denier Cordura nylon exterior cover  Constructed of ceramic face with composite backing   Made in the USA  10 Year warranty  Stopping Power .357 SIG FMJ  9MM .38 .40 S&W .44 .45 .223 BALL  5.56X45 (XM 193) 7.62 X 39 BALL  7.62 x 51 M80 Nato M855/SS109 7.62x54R API 7.62x63 M2AP

SPARTAN ARMOR SYSTEMS® "SPARTAN" SHOOTERS CUT PLATE CARRIER   Product Overview The Spartan Armor Systems® "Spartan" Plate Carrier is true to its name: sleek, minimalist, and highly capable on the battlefield. Designed to be lightweight, agile, and to enable the wearer to rapidly engage, the Spartan Armor Systems® “Spartan” Shooters Cut Plate Carrier is designed for use with our shooters cut steel core armor: Spartan™ Omega™ AR500 and AR550. Adjustable from Medium to XL, this carrier fits 10”x12” shooters cut plates and will accommodate 6”x6” side plates in the cummerbund. The Spartan Shooters Cut Plate Carrier is built to last and gives you the key essential features you need without sacrificing quality. The Spartan Shooters Cut Carrier is a great entry-level carrier that offers a variety of features at an affordable price point. When the situation dictates less is more, this carrier delivers the goods where it counts.    Spartan Armor Systems® Spartan Shooters Cut Plate Carrier Specs: Lightweight Plate Carrier That Accepts Side Plates Designed For Spartan Armor Systems® 10” X 12” Shooters Cut Steel Core Plates Adjustable From Medium To XL PALS Webbing On Front And Back For Versatility And Customization Velcro On Front And Back For Id Patch Placement Cummerbund Is Designed To Hold 6” X 6” Side Plates Comfortably Shoulder Pads Included 860 Denier Poly Construction Reinforced Drag Handle   SPARTAN™ OMEGA™ AR500 BODY ARMOR SHOOTERS CUT SET OF TWO Product Overview Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.    Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.    Exceptional Comfort & Engineering You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.    Chest Plate Weight (per plate):  10"x12" Plate: Base Coat 8lbs 10oz. Side Plate Weight (per plate):  6×6 approximately 2lbs 1oz (base coat)  Additional Spartan™ Omega™ AR500 Body Armor - Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.       *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.  

PRODUCT DETAILS Spartan Armor Systems Active Shooter Kit   Spartan™ Omega™ AR500 Body Armor with Hydra Plate Carrier. This active shooter kit set up is designed to allow a quick response time and comfortable performance fit with superior Level III Rifle Rated Protection. Carrier includes emergency drag handle, quick cinch adjustments for the front and hook and loop adjustments on the shoulders. The Spartan Armor Active Shooter Kit is perfect for rapid response situations.   Front map pocket Emergency drag handle Removable padded mesh shoulder pads with hook and loop guides Adjustable shoulder straps Hook and loop webbing Heavyweight webbing for modular attachments Padded mesh interior lining Quick adjust cinches Quick release buckles Easy access plate pockets Waist Size: 30″ – 46″ adjustable sizing Accepts traditional Medium or Large SAPI plates up to 10.25″ x 13.25″. Best fit for our shooters cut and swimmers cut Spartan™ Omega™ AR500 Body Armor and AR550 Body Armor. This package includes our Spartan™ Omega™ AR500 Body Armor 10x12 lab certified Armor. 1/4" thickness and provides the operator with Level III protection IAW NIJ0101.06 standards.    Our Spartan™ Omega™ AR500 Body Armor has also been tested to go beyond the Level III testing protocol (6 shots .308/M80 Ball, 2780 fps).  Special Threat Ratings: SS109/M855 3148 fps 6 shots .223 REM 60gr. Partition 2762 fps 6 shots M43 MSC 2407 fps 6 shots M67 Led Core 2375 fps 6 shoots     With all of our AR500 Omega™ Spartan Armor Systems™ products, we only use ballistic LAB CERTIFIED AR500 steel! All purchases of our Spartan Armor products have current lab certificates and secondary ballistics available on request. Remember, not all body armor is created equal! Read our "FAQ" to find out more about the Spartan™ Omega™ AR500 Body Armor we use to construct out body armor! Coating Options:  Choose the Full Coat option to have the plate lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™.  The result is a plate approximately 1/2-5/8” total thickness.  See our FAQ for more information about our Encapsaloc ™ process. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities. To learn more check out our blog on the coating options: https://www.spartanarmorsystems.com/blog/encapsaloc-fragmentation-mitigation-antispall-body-armor-coating/   Chest Plate Weight (per plate): 10x12 Spartan™ Omega™ AR500 Body Armor Shooters Cut: Base Coat 8lbs 7oz. Full Coat 9lbs 3oz.      Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.         *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems AR500 Omega Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

The Hydra Plate Carrier is a highly adaptable carrier ideal for quick deployment and emergency situations such as active shooter scenarios. Easily adjustable buckles ensure a snug and comfortable fit on the sides. Ample length shoulder straps allow the Hydra plate carrier to be easily adjusted to fit a wide variety of body types. Breathable mesh is used at chest, back and shoulder contact points to allow for maximum breathability. The Hydra plate carrier is a great choice for anyone looking for a lightweight and versatile body armor configuration. Front map pocket Emergency drag handle Removable padded mesh shoulder pads with hook and loop guides Adjustable shoulder straps Hook and loop webbing Heavyweight webbing for modular attachments Padded mesh interior lining Quick adjust cinches Quick release buckles Easy access plate pockets Waist Size: 30″ – 46″ adjustable sizing Accepts Medium or Large SAPI plates up to 10.25″ x 13.25″   Constructed from lab certified AR500 Omega™ Armor, (1/4” thickness) these plates provide the operator with Level III protection IAW NIJ0101.06 standards.   With all of our AR500 Omega™ Spartan Armor Systems™ products, we only use ballistic LAB CERTIFIED AR500 steel! All purchases of our Spartan Armor products have current lab certificates available on request. Remember, not all body armor is created equal! Read our "FAQ" to find out more about the AR500 Omega™ Armor we use to construct out body armor!     Full Coat or Base Coat Options:    We are excited to announce our potentially “life saving” breakthrough!  The strike face for our plates is mark embedded with our Spartan logo! Both sides of these plates are coated, however, the back side only has a “courtesy coat” to protect against wear and rust. The front of the plate is lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™.  The result is a plate approximately 1/2-5/8” total thickness.  See our FAQ for more information about our Encapsaloc ™ process. Due to popular demand, we have added a “base coat” only option for our AR500 Omega™ armor products. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities.   Chest Plate Weight (per plate): 10x12 AR500 Omega™ Armor Swimmers Cut: Base Coat 7lbs 7oz. Full Coat 8lbs 1oz.    *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems AR500 Omega™ Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

Spartan Armor Systems® Spartan DL Plate Carrier Specs:  Low-profile Minimalist Carrier Bottom-loading Design Supports The Plate In The Pocket 4″ Fully Adjustable Elastic Cummerbund 2” Low Profile Shoulder Adjustment Velcro On Front And Back For Name, Id, Blood Type, Etc. Material: 500 Denier Nylon/Pu Nylon Webbing Size: 11.4" X 12.5" Integrated Mag Pouches Hold M4 Mags As Well As A Pistol Mags (2 On Each Side) Note: Due to the extremely low profile design of the Spartan DL Plate Carrier, they WILL NOT ACCEPT SIDE PLATES. Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor Specs:  Tested And Passed In Accordance With NIJ-std-0101.06 / MIL-STD-662F Rated To Stop .44 MAG SJHP, As Well As Special Threat Rated To Stop .357 Sig FMJ Multi-hit Rated To Stop 6 Rounds This Soft Armor Can Be Used Stand-alone, Giving Level IIIA Protection Or ICW (In Conjunction With) As A Backer On Any Of Hard Armor Systems All Parts Of This Product Are Proudly American Made .35" Profile 10" X 12" Panel: Weight 1.14 Lb Made In U.S.A. SPARTAN ARMOR SYSTEMS® SPARTAN DL PLATE CARRIER Product Overview When the environment you are operating in demands discretion and stealth, the Spartan Armor Systems® DL Plate Carrier offers minimalist features for extreme concealment. Virtually indiscernible when worn beneath loose clothing, these ultra-minimalist carriers are designed to fit with Spartan Armor Systems® Flex Fused Core Soft Armor Panels. Covert, comfortable, and concealed - the Spartan DL Plate Carrier is made for environments that demand maintaining a low profile. The Spartan DL Concealment carrier can also be worn overt (on the outside of clothing) and can accept hard armor such as Spartan™ Omega™ AR500, AR550, or Armis IIIA Hard Armor. Rugged, Reliable, Versatile The Low-profile design of the Spartan Armor Systems® DL Plate Carrier features bottom-loading plate insertion capability and a 4” fully adjustable cummerbund. This carrier comes in two sizes and can accommodate 10"x12" or 11"x14" body armor plates. The 500 Denier/Nylon blended material makes for an extremely durable, comfortable carrier that will flex and bend, contouring to your torso as you move throughout your day and activities. The inclusion of built-in soft Mag Pouches provides a tactical advantage. The Spartan DL Plate Carrier can accept AR Mags as well as a Pistol Mag (2 on each side) for versatility and quick access to your reloads.  Spartan Armor Systems® Spartan DL Plate Carrier Specs:  Low-profile Minimalist Carrier Bottom-loading Design Supports The Plate In The Pocket 4″ Fully Adjustable Elastic Cummerbund 2” Low Profile Shoulder Adjustment Velcro On Front And Back For Name, Id, Blood Type, Etc. Material: 500 Denier Nylon/Pu Nylon Webbing Size: 11.4" X 12.5" Integrated Mag Pouches Hold M4 Mags As Well As A Pistol Mags (2 On Each Side) Note: Due to the extremely low profile design of the Spartan DL Plate Carrier, they WILL NOT ACCEPT SIDE PLATES. SPARTAN ARMOR SYSTEMS® FLEX FUSED CORE™ IIIA SOFT BODY ARMOR Product Overview  Spartan Armor Systems® listens to their customer base, and we answered the call when it came to developing and producing superior pistol-rated level IIIA soft body armor. According to 2019 DOJ crime statistics, 17x more homicides are committed with handguns versus rifles. With crime and homicides on the rise in many major cities, level IIIA soft body armor has become more relevant than ever. The Spartan Armor Systems®™ Flex Fused Core™ Soft Armor is extremely low profile, flexible, comfortable, and easy to wear. Composed of only the best American-made materials and proudly assembled in our state-of-the-art facility in Tucson, Arizona. If you’re looking for discreet protection against handgun threats, Flex Fused Core™ IIIA Soft Armor is an affordable solution made with the highest quality standards. Comfortable, Concealable, Effective Spartan Armor Systems® Flex Fused Core™ has been tested by an independent NIJ credentialed laboratory to verify that it meets NIJ level IIIA specifications, which means it will stop .44 MAG SJHP, as well as being Special Threat Rated to stop.357 SIG FMJ impacts. This soft armor is also multi-hit rated and is capable of stopping up to 6 rounds. The low-profile nature of the armor combined with the superior standards in quality control and production ensure that Spartan Armor Systems®™ Flex Fused Core™ Soft Armor IIIA Soft Body Armor will remain as rugged, durable, and effective as it is comfortable. This is a fantastic option for those seeking to use the Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor in discrete environments, or for those looking to enhance any of their Spartan Armor Systems® hard armor products.  Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor Specs:  Tested And Passed In Accordance With NIJ-std-0101.06 / MIL-STD-662F Rated To Stop .44 MAG SJHP, As Well As Special Threat Rated To Stop .357 Sig FMJ Multi-hit Rated To Stop 6 Rounds This Soft Armor Can Be Used Stand-alone, Giving Level IIIA Protection Or ICW (In Conjunction With) As A Backer On Any Of Hard Armor Systems All Parts Of This Product Are Proudly American Made .35" Profile 10" X 12" Panel: Weight 1.14 Lb Made In U.S.A.

SPARTAN ARMOR SYSTEMS® SENTINEL PLATE CARRIER Product Overview The Spartan Armor Systems® Sentinel Plate Carrier is an extremely rugged, lightweight, feature-packed plate carrier that affords users a high degree of comfort and customization. Whether you are shopping for your first plate carrier or your next plate carrier, the Sentinel carrier platform allows the operator significant freedom to build and customize to fit their needs.  Ready For Anything Fitting 38” to 48” chest sizes, the Sentinel Plate Carrier is fabricated from 1000 denier fabric and fits 10"x12" shooters cut plates. Featuring anti-slip shoulder padding with velcro, side release buckles, and a highly breathable padded mesh throughout the interior for comfort the Sentinel Plate Carrier affords all-day comfort and wearability. The removable cummerbund features removable side plate pockets for both 6"x6" and 6"x8" plate armor inserts for added protection. The Spartan Armor Systems Sentinel Plate Carrier has been one of our most popular carriers with thousands having been sold to Law Enforcement Officers and Civilians alike. Spartan Armor Systems® Sentinel Plate Carrier Specs: Adjustable from 38" To 48" Chest Size Durable Emergency Drag Handle Anti-slip Shoulder Padding With Velcro Side Release Buckles On The Internal Waist Strap Padded Mesh Separators For The Interior Of The Carrier For Breathability Fits 10" X 12" Shooters Cut Plates Removable Cummerbund With Side Plate Pockets For 6" X 6" And 6" X 8" Side Plate Armor Velcro In Front Of The Carrier Is 8” X 4” With A Velcro Loop On Each Side Velcro On The Back Of The Carrier Measures 9” X 3” Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time 1000 Denier Bottom Loading Weighs Approximately 2lbs. 9oz. NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates.   SPARTAN™ OMEGA™ AR500 BODY ARMOR SHOOTERS CUT SET OF TWO Product Overview Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.    Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.    Exceptional Comfort & Engineering You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.    Chest Plate Weight (per plate):  10"x12" Plate: Base Coat 8lbs 10oz. Full Coat 9lbs 11oz. Side Plate Weight (per plate):  6×6 approximately 2lbs 1oz (base coat) or 2lbs 15oz (full coat) 6×8 approximately 3lbs 10oz (base coat) or 3lbs 14oz (full coat)   Additional Spartan™ Omega™ AR500 Body Armor - Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.       *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.    

SPARTAN ARMOR SYSTEMS® SENTINEL PLATE CARRIER   Product Overview The Spartan Armor Systems® Sentinel Plate Carrier is an extremely rugged, lightweight, feature-packed plate carrier that affords users a high degree of comfort and customization. Whether you are shopping for your first plate carrier or your next plate carrier, the Sentinel carrier platform allows the operator significant freedom to build and customize to fit their needs.  Ready For Anything Fitting 38” to 48” chest sizes, the Sentinel Plate Carrier is fabricated from 1000 denier fabric and fits 10"x12" shooters cut plates. Featuring anti-slip shoulder padding with velcro, side release buckles, and a highly breathable padded mesh throughout the interior for comfort the Sentinel Plate Carrier affords all-day comfort and wearability. The removable cummerbund features removable side plate pockets for both 6"x6" and 6"x8" plate armor inserts for added protection. The Spartan Armor Systems Sentinel Plate Carrier has been one of our most popular carriers with thousands having been sold to Law Enforcement Officers and Civilians alike. Spartan Armor Systems® Sentinel Plate Carrier Specs: Adjustable from 38" To 48" Chest Size Durable Emergency Drag Handle Anti-slip Shoulder Padding With Velcro Side Release Buckles On The Internal Waist Strap Padded Mesh Separators For The Interior Of The Carrier For Breathability Fits 10" X 12" Shooters Cut Plates Removable Cummerbund With Side Plate Pockets For 6" X 6" And 6" X 8" Side Plate Armor Velcro In Front Of The Carrier Is 8” X 4” With A Velcro Loop On Each Side Velcro On The Back Of The Carrier Measures 9” X 3” Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time 1000 Denier Bottom Loading Weighs Approximately 2lbs. 9oz. NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates. SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SET OF TWO   Product Overview Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Protective Value Added  We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.    Battle Hardened Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.   IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.   Blazing The Trail of Innovation Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Shooters Cut Plate Weight (per plate):. 10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz. or Full Coat 8lbs 10oz. Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness   Side Plate Weight (per plate):     6×6 approximately 2lbs 9oz (base coat) or 2lbs 11oz (full coat) 6×8 approximately 3lbs 6 oz (base coat) or 3lbs 12oz (full coat).   AR550 Body Armor - Shooters Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See a Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.        

SPARTAN ARMOR SYSTEMS SENTINEL SWIMMERS PLATE CARRIER Durable emergency drag handle Anti-Slip shoulder padding w/ velcro Side release buckles on internal waist strap Padded elevated mesh on interior of carrier for breathability Fits 10x12 Swimmers cut plates Removable cummberbund with side plate pockets for 6x6 and 6x8 side plate armor Velcro in front of the Carrier is 8x4 w/ a velcro loop on each side Velcro on the back of the Carrier measures 9x3 Stronger carrier material that can withstand through wear and tear over a long period of time 1000 denier Bottom loading Weighs approximately 2lbs. 9oz. NOTE: This carrier is designed to fit swimmers cut plates manufactured by Spartan Armor Systems. We can not guarantee a fit with plates made by other manufacturers.    NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates!

Spartan Armor Systems Spartan AR550 Body Armor And Tactical Response Kit When purchasing this package you will receive: (1) Tactical Response Laser Cut Plate Carrier (Black, Coyote Brown, OD Green). (2) 10x12 Spartan AR550 Body Armor Shooters Cut Chest/Back Plates. Plate Carrier Specs: 1000 Denier Materials Light weight and Duty 1000 Denier laser Cut Molle Zippered Admin Pouch Kangaroo pouch with removable triple M4 Pouches Padded Shoulder Pads Padded Front and rear with ventilation vents Low Profile Drag Handle Molle Velcro front and rear for Identifier Patches 2-inch replaceable quick release buckles Accepts 10" x 12" Body Armor Comes with a Storage Bag Fits S to XL Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.   Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?  Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.    Buy Body Armor - Level III+ Spartan AR550 Armor We’ve taken our Level III Body Armor to a NEW level! Spartan Armor Systems™ is pleased to introduce our AR550 Body Armor!  With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated! Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our  ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel is much harder than AR500, but not too hard to cause severe stress while forming. Advanced Triple Curve (ATC) AR550 Spartan Body Armor. An industry FIRST! Spartan Armor Systems™ is proud to be the FIRST in the industry to commercially offer triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Level III+ Side Plates:   Choose from either 6″ x 6″ (small) or 6″ x 8″ (large) Chest Plate Weight (per plate):   10x12 AR550 Shooters Cut: Base Coat 8lbs 1oz. Full Coat 8lbs 10oz. Side Plate Weight (per plate):    6×6 approximately 2lbs 9oz (base coat), 2lbs 11oz (full coat), 6×8 approximately 3lbs 6oz (base coat), 3lbs 12oz (full coat). Thickness:   .25″ AR550 plus approximately .25″ coating (full coat) makes this slim profile plate overall .5-.6″ in total thickness As with all of our Armor products, we only use the highest grade of AR550 to manufacture our armor! Remember, not all body armor is created equal! Read our “FAQ” to find out more about the AR550 Armor we use to construct our body armor! Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations: Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited. The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.

When purchasing this package you will receive: (1) Tactical Response Laser Cut Plate Carrier (Black, Coyote Brown, OD Green). (2) 10x12 Spartan™ Omega™ AR500 Body Armor Shooters Cut Chest/Back Plates. Plate Carrier Specs: 1000 Denier Materials Light weight and Duty 1000 Denier laser Cut Molle Zippered Admin Pouch Kangaroo pouch with removable triple M4 Pouches Padded Shoulder Pads Padded Front and rear with ventilation vents Low Profile Drag Handle Molle Velcro front and rear for Identifier Patches 2-inch replaceable quick release buckles Accepts 10" x 12" Body Armor Comes with a Storage Bag Fits S to XL Constructed from lab certified Spartan™ Omega™ AR500 Body Armor, (1/4” thickness) these plates provide the operator with Level III protection IAW NIJ0101.06 standards. With all of our Spartan™ Omega™ AR500 Body Armor products, we only use ballistic LAB CERTIFIED AR500 steel! All purchases of our Spartan Armor products have current lab certificates available on request. Remember, not all body armor is created equal! Read our "FAQ" to find out more about the steel we use to construct out body armor! You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die. Or with our Advanced Triple Curve ™.  Instead of bending our formed plates in 2 different locations as we used to, we have machined custom tooling to give these plates a nice curvature to best conform to the side of your torso. Spartan Armor Systems™ is proud to be the FIRST in the industry to commercially offer triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems’ ATC™ body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC™ armor better “hugs” the operator’s body, resulting in a significant increase in comfort. Our CNC equipment capabilities have allowed us to create dies which form our body armor without any “crease” bends. Crease bends, “work hardens” the plate and causes a significant amount of stress to the portion of the plate under load. We HIGHLY suggest when doing research to ask if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems™ has gone the extra mile to create this die process.  Full Coat or Base Coat Options:  We are excited to announce our potentially “life saving” breakthrough!  The strike face for our plates is mark embedded with our Spartan logo! Both sides of these plates are coated, however, the back side only has a “courtesy coat” to protect against wear and rust. The front of the plate is lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™.  The result is a plate approximately 1/2-5/8” total thickness.  See our FAQ for more information about our Encapsaloc ™ process. Due to popular demand, we have added a “base coat” only option for our AR500 armor products. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities.   Chest Plate Weight (per plate): 10x12 Spartan™ Omega™ AR500 Body Armor Shooters Cut: Base Coat 8lbs 10oz. Full Coat 9lbs 11oz.   Side Plate Weight (per plate): 6×6 approximately 2lbs 1oz (base coat) 2lbs 15oz (full coat), 6×8 approximately 3lbs 10oz (base coat) 3lbs 14oz (full coat).   Advanced Triple Curve™ (ATC) Spartan™ Omega™ AR500 Body Armor | Spartan Armor Systems™ With our Spartan™ Omega™ AR500 Body Armor Advanced Triple Curve™ body armor, the operator now has increased comfort. The Spartan™ Omega™ AR500 Body Armor, cut from genuine lab-certified Omega Armor, offers advanced Level III protection. We’ve taken everything in to consideration, to include ergonomics, functionality, and price point.   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations: Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited. The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.   *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC. See A Comparison of Our Full Line of Body Armor:

SPARTAN ARMOR SYSTEMS® SENTINEL PLATE CARRIER   Product Overview The Spartan Armor Systems® Sentinel Plate Carrier is an extremely rugged, lightweight, feature-packed plate carrier that affords users a high degree of comfort and customization. Whether you are shopping for your first plate carrier or your next plate carrier, the Sentinel carrier platform allows the operator significant freedom to build and customize to fit their needs.  Ready For Anything Fitting 38” to 48” chest sizes, the Sentinel Plate Carrier is fabricated from 1000 denier fabric and fits 10"x12" shooters cut plates. Featuring anti-slip shoulder padding with velcro, side release buckles, and a highly breathable padded mesh throughout the interior for comfort the Sentinel Plate Carrier affords all-day comfort and wearability. The removable cummerbund features removable side plate pockets for both 6"x6" and 6"x8" plate armor inserts for added protection. The Spartan Armor Systems Sentinel Plate Carrier has been one of our most popular carriers with thousands having been sold to Law Enforcement Officers and Civilians alike. Spartan Armor Systems® Sentinel Plate Carrier Specs: Adjustable from 38" To 48" Chest Size Durable Emergency Drag Handle Anti-slip Shoulder Padding With Velcro Side Release Buckles On The Internal Waist Strap Padded Mesh Separators For The Interior Of The Carrier For Breathability Fits 10" X 12" Shooters Cut Plates Removable Cummerbund With Side Plate Pockets For 6" X 6" And 6" X 8" Side Plate Armor Velcro In Front Of The Carrier Is 8” X 4” With A Velcro Loop On Each Side Velcro On The Back Of The Carrier Measures 9” X 3” Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time 1000 Denier Bottom Loading Weighs Approximately 2lbs. 9oz. NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates. SPARTAN™ OMEGA™ AR500 BODY ARMOR SHOOTERS CUT SET OF TWO   Product Overview Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. Spartan Omega AR500 plates provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.    Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.    Exceptional Comfort & Engineering You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.    Chest Plate Weight (per plate):  10"x12" Plate: Base Coat 8lbs 10oz. Side Plate Weight (per plate):  6×6 approximately 2lbs 1oz (base coat)   Additional Spartan™ Omega™ AR500 Body Armor - Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.       *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

Soft Body Armor Panel available in 10×12 and 11×14 options SAPI style cut Lightweight CaliberX™ 10×12 15.8oz, 11×14 1lb 4oz Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2 Waterproof Interior sewn together for longevity Proudly made in the U.S.A Features Removable cummerbund with double layer Mil-Spec Velcro® Two (2) internal pouches on each side of cummerbund Fully adjustable shoulder straps Large soft side Velcro® area for placards Made with Mil-Spec IR Treaded 500D Cordura® Mil-Spec IR Treated Murdock Webbing® All of the fabrics, webbing and plastic hardware are treated at source to deliver the lowest I.R. signature possible Weight 1 lb Available in: Black, Coyote Tan, Ranger Green and MultiCam® The Low-Visibility Plate Carrier is made with high quality U.S. Mil-Spec sourced materials and designed by U.S. Veterans. Sizing:Regular: Fits 10×12” plates or soft armor panelsX-Large: Fits 11×14 plates or soft armor panels Caliber Armor CaliberX Ultra Light Weight Soft Armor With Concealment Carrier Soft Body Armor Panel available in 10×12 and 11×14 options SAPI style cut Lightweight CaliberX™ 10×12 15.8oz, 11×14 1lb 4oz Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2 Waterproof Interior sewn together for longevity Proudly made in the U.S.A Caliber Armor manufacturers our CaliberX™ Soft Armor line of body armor inserts from the very best para-aramid materials on the market. They are bullet resistant and waterproof. We have created an affordable soft armor system that meets the gold standard of 1lb per sqft areal density. We’ve partnered with DuPont to develop the next generation of a stronger, lighter soft armor system. We chose to work with Dupont Kevlar® fibers in our CaliberX™ Soft Armor because DuPont constantly upgrades and improves Kevlar®. We have fully maximized the material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death. CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest. CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of unidirectional fabric. The fibers absorb and disperse the energy of the impact to underlying fibers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma. Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm. CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing. NIJ STANDARD-0101.06 and .07 Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 IIIA and 0101.07 HG2 MANUFACTURING TOLERANCES: Thickness dimensions are +-1/8 in. Width and length dimensions are +0.00 to 0.25 in. All weights are +- 5%. Low-Visibility Plate Carrier This Low-Visibility Plate Carrier is low profile and designed to endure and outlast any mission. It is fully adjustable for size, comfort, and protection. The sides are made from double layer Mil-Spec elastic and incorporates two internal pouches on each side which can hold magazine pouches and/or communication tools. The shoulder and sides of the Low-Visibility Plate Carrier are fully adjustable with Velcro® closures.  Features Removable cummerbund with double layer Mil-Spec Velcro® Two (2) internal pouches on each side of cummerbund Fully adjustable shoulder straps Large soft side Velcro® area for placards Made with Mil-Spec IR Treaded 500D Cordura® Mil-Spec IR Treated Murdock Webbing® All of the fabrics, webbing and plastic hardware are treated at source to deliver the lowest I.R. signature possible Weight 1 lb Available in: Black, Coyote Tan, Ranger Green and MultiCam® The Low-Visibility Plate Carrier is made with high quality U.S. Mil-Spec sourced materials and designed by U.S. Veterans. Sizing:Regular: Fits 10×12” plates or soft armor panelsX-Large: Fits 11×14 plates or soft armor panels

Highlights NIJ Certified Ballistics Multi-Threat Protection All Day Comfort Modular System Front and Back Plate Pockets  MOLLE Compatible  Adjustable Shoulders for Improved Fit  Adjustable Side Closure System Reinforced, Heavy-Duty Rescue Straps Easily Washable What's Included 1 All Star Tactical Vest 1 FREE Armor Carry Bag a $79 value 1 Set of Certified Level IIIA ballistics (front and back that fully wrap the sides) All Star Tactical Enhanced Multi-Threat Vest The All Star Tactical Multi-Threat Vest is NIJ Certified IIIA soft armor wrap around vest with pockets to add a front and back hard armor plate. This vest is a workhorse. It’s made to take a serious beating while retaining its effectiveness. Front and back 10" x 12" plate pockets for hard armor inserts increase your ballistic protection. Shear stopping power in an ultra-reliable carrier makes our Tac vests popular with law enforcement and personal protection specialists.  This vest includes NIJ Certified Level IIIA front and back armor inserts capable of stopping all common handgun rounds including .357, 9MM, 45ACP, and 44 Magnum bullets. When you need Level IIIA body armor that you can wear all day, the All Star Tactical Multi-Threat Vest is the perfect carrier for you. Highlights NIJ Certified Ballistics Multi-Threat Protection All Day Comfort Modular System  Front and Back Plate Pockets   MOLLE Compatible   Adjustable Shoulders for Improved Fit   Adjustable Side Closure System  Reinforced, Heavy-Duty Rescue Straps Easily Washable What's Included 1 All Star Tactical Vest 1 FREE Armor Carry Bag a $79 value 1 Set of Certified Level IIIA ballistics (front and back that fully wrap the sides)  Weight in Lbs. Size Light Lighter Lightest Small 5.6 4.3 3.1 Medium 6.2 4.7 3.4 Large 6.5 5.0 3.6 XL 6.9 5.3 3.8 2XL 7.2 5.5 4.0 3XL 8.2 6.3 4.5 4XL 8.7 6.7 4.8 5XL 9.8 7.5 5.4   Specifications  Sq. Inches of Ballistics  Size Sq. Inches  Small 374  Medium 421  Large 447  XL 481  2XL 504  3XL 588  4XL 631  5XL 707    Thinness Light 0.35 inch Lighter 0.25 inch Lightest 0.21 inch

Highlights NIJ  Certified Ballistics Ultra Concealable Low Profile Design Multi-Threat Protection 10" x 12" Plate Pocket in the Front and Back Lightweight Construction Overlapping Side Coverage Moisture-wicking, Anti-Microbial Inner Liner 4-point Adjustable Strapping System Dual 6 x 8 and 7 x 9 Front Plate Pockets Low Profile Loop for Reduced Friction Machine Washable Whats Included All American Carrier Set (2) of Certified Level IIIA Soft Armor Insert Lighter IIIA+ Special Threat Protection V50 - 2gr RCC 3060 ft/s (932m/s)V50 - 4gr RCC 2642 ft/s (805m/s)V50 - 16gr RCC 2244 ft/s (684m/s)V50 - 17gr FSP (.22cal) 2017 ft/s (615m/s)V50 - 64gr RCC 1866 ft/s (569m/s)V50 – 9mm 127gr SXT (new) 1754 ft/s (534m/s)P-BFS Avg. – 9mm 127gr SXT 24.6 mmP-BFS Avg. – 40cal 165gr S+W Sp GDHP 27.2 mmP-BFS Avg. – 5.7x28 27gr SS195 17 mmP-BFS Avg. – 5.7x28 27gr SS197 19.3 mm Lightest IIIA+ Special Threat Protection V50 - 2gr RCC 2918 fps (890 m/s)V50 - 4gr RCC 2553 fps (778 m/s)V50 - 16gr RCC 2124 fps (647 m/s)V50 - 17gr FSP (.22cal) 2006 fps (611 m/s)V50 - 64gr RCC 1809 fps (551 m/s)V50 – 9mm 127gr SXT 1755 fps (535 m/s)P-BFS Avg. – 9mm 127gr SXT 29 mmV50 – 40cal 165gr GDHP NA - Testing Terminated Due to Velocity LimitationP-BFS Avg. – 40cal 165gr GDHP 29 mmV50 – 5.7x28mm 27gr SS195 HP 2422 fps (738 m/s)P-BFS Avg. – 5.7x28mm 27gr SS195 HP 17 mm All American Concealable Enhanced Multi-Threat Vest The All American Concealable Multi-Threat Vest is one of our most discreet carriers with Level IIIA soft armor and the ability to add a front and back 10" x 12" hard armor rifle plate. Optimizing our soft armor and Certified Level IIIA ballistics this combines advanced multi-threat armor options with comfortable all-day wear-ability, making it the most versatile and dependable concealable vest  on the market.  A favorite of law enforcement, private security personnel, and everyday citizens, this carrier is made to protect the wearer while maintaining comfort, discretion, and performance . Featuring advanced insert options, you can customize your All American Vest to fit your specific needs! This vest includes NIJ Certified Level IIIA front and back armor inserts capable of stopping all common handgun rounds including .357, 9MM, 45ACP, and 44 Magnum bullets. With full wrap-around protection, if selected the armor performs at Level III+ for Special Threat Attacks when combined with our hard armor plates. When you need a soft armor vest that you can wear all day every day, the All American Concealable Carrier is the perfect armor for you. Highlights NIJ  Certified Ballistics Ultra Concealable Low Profile Design Multi-Threat Protection 10" x 12" Plate Pocket in the Front and Back Lightweight Construction Overlapping Side Coverage Moisture-wicking, Anti-Microbial Inner Liner 4-point Adjustable Strapping System Dual 6 x 8 and 7 x 9 Front Plate Pockets Low Profile Loop for Reduced Friction Machine Washable Whats Included All American Carrier Set (2) of Certified Level IIIA Soft Armor Inserts   Specifications Size Light (.35”) Lighter (.25”) Lightest (.21”) Sq. Inches of Ballistics Small 5.6 lbs 4.3 lbs 3.1 lbs 374” Medium 6.2 lbs 4.7 lbs 3.4 lbs 421” Large 6.5 lbs 5.0 lbs 3.6 lbs 447” XL 6.9 lbs 5.3 lbs 3.8 lbs 481” 2XL 7.2 lbs 5.5 lbs 4.0 lbs 504” 3XL 8.2 lbs 6.3 lbs 4.5 lbs 588” 4XL 8.7 lbs 6.7 lbs 4.8 lbs 631” 5XL 9.8 lbs 7.5 lbs 5.4 lbs 707”   Lighter IIIA+ Special Threat Protection V50 - 2gr RCC 3060 ft/s (932m/s)V50 - 4gr RCC 2642 ft/s (805m/s)V50 - 16gr RCC 2244 ft/s (684m/s)V50 - 17gr FSP (.22cal) 2017 ft/s (615m/s)V50 - 64gr RCC 1866 ft/s (569m/s)V50 – 9mm 127gr SXT (new) 1754 ft/s (534m/s)P-BFS Avg. – 9mm 127gr SXT 24.6 mmP-BFS Avg. – 40cal 165gr S+W Sp GDHP 27.2 mmP-BFS Avg. – 5.7x28 27gr SS195 17 mmP-BFS Avg. – 5.7x28 27gr SS197 19.3 mm Lightest IIIA+ Special Threat Protection V50 - 2gr RCC 2918 fps (890 m/s)V50 - 4gr RCC 2553 fps (778 m/s)V50 - 16gr RCC 2124 fps (647 m/s)V50 - 17gr FSP (.22cal) 2006 fps (611 m/s)V50 - 64gr RCC 1809 fps (551 m/s)V50 – 9mm 127gr SXT 1755 fps (535 m/s)P-BFS Avg. – 9mm 127gr SXT 29 mmV50 – 40cal 165gr GDHP NA - Testing Terminated Due to Velocity LimitationP-BFS Avg. – 40cal 165gr GDHP 29 mmV50 – 5.7x28mm 27gr SS195 HP 2422 fps (738 m/s)P-BFS Avg. – 5.7x28mm 27gr SS195 HP 17 mm

Features of Advanced Body Armor Plate Carrier : Black in Color One size fits all, fully adjustable Holds two 10" x 12" plates; Heavy duty drag handle Modular Plate Carrier Includes Front & Back 10" x 12" NIJ Certified Level III Hard Armor; 6.9 lbs. each 13/64 or 5mm thickness 10” x 12”s NIJ III 0101.06 Certified; 10 year warranty Maximum durability Multi-hit capability Standard black color Single curve WHAT IS INCLUDED: 1 Qty. Advanced Plate Carrier 2 Qty. Certified Level III+ Steel Plates; Advanced Body Armor Plate Carrier Introducing the Advanced Body Armor Plate Carrier from Body Armor Direct; This is the best designed plate carrier for daily use. Simply add your patch and attachments and go. We have this in stock and it ships same day! Features of Advanced Body Armor Plate Carrier : Black in Color One size fits all, fully adjustable Holds two 10" x 12" plates; Heavy duty drag handle Modular Plate Carrier Includes Front & Back 10" x 12" NIJ Certified Level III Hard Armor; 6.9 lbs. each 13/64 or 5mm thickness 10” x 12”s NIJ III 0101.06 Certified; 10 year warranty Maximum durability Multi-hit capability Standard black color Single curve WHAT IS INCLUDED: 1 Qty. Advanced Plate Carrier 2 Qty. Certified Level III+ Steel Plates;

Features of Advanced Body Armor Plate Carrier: Level III+ Certified Ballistics Black in Color One Size Fits All, Fully Adjustable Design Holds Two 10" x 12" Plates  Holds Two Additional Side Plates in the Cummerbund Heavy Duty Drag Handle Modular Plate Carrier All Day Comfort MOLLE Compatible Easily Washable What's Included Advanced Plate Carrier with Cummerbund Hard armor as selected Front & Back 10" x 12" Hard Armor  NIJ III 0101.06 Certified Armor 10 year warranty Maximum durability Multi-hit capability Standard black color Single curve Plates Perform at Level III+ to Stop: 5.56mm x 45mm M193 stops up to 3,000 FPS 5.56mm x 45mm M855 / SS109 Steel penetrator (Green Tip) 7.62mm x 39mm 123 gr steel core 7.62mm x 51mm M80 NATO (.308) All types of handguns Advanced Body Armor Plate Carrier with Cummerbund The Advanced Body Armor Plate Carrier With Cummerbund is our state of the art plate oriented armor. The included plates have an NIJ III+ rating. This carrier was designed to be worn comfortably day in and day out. Fully adjustable “one size fits all” configuration, rugged durability, and extended side coverage make this vest ideal for homeland security officers, military contractors, or personal protection specialists.    This carrier includes NIJ Certified Level III front and back hard armor inserts with additional side plates in the cummerbund capable of stopping  5.56mm x 45mm M193, 5.56mm x 45mm M855 / SS109, Steel Penetrators (Green Tip), 7.62mm x 39mm 123 GR Steel Core, 7.62mm x 51mm M80 NATO (.308), as well as all common handgun rounds. When you need Level III body armor that you can wear all day, the Advanced Plater Carrier With Cummerbund is the perfect carrier for you.   Features of Advanced Body Armor Plate Carrier: Level III+ Certified Ballistics Black in Color One Size Fits All, Fully Adjustable Design Holds Two 10" x 12" Plates  Holds Two Additional Side Plates in the Cummerbund Heavy Duty Drag Handle Modular Plate Carrier  All Day Comfort  MOLLE Compatible Easily Washable  What's Included Advanced Plate Carrier with Cummerbund Hard armor as selected Front & Back 10" x 12" Hard Armor  NIJ III 0101.06 Certified Armor 10 year warranty Maximum durability Multi-hit capability Standard black color Single curve Plates Perform at Level III+ to Stop: 5.56mm x 45mm M193 stops up to 3,000 FPS 5.56mm x 45mm M855 / SS109 Steel penetrator (Green Tip) 7.62mm x 39mm 123 gr steel core 7.62mm x 51mm M80 NATO (.308) All types of handguns

Features of Advanced Body Armor Plate Carrier: Black in Color One size fits all, fully adjustable Holds two 10" x 12" plates  Heavy duty drag handle Modular Plate Carrier 10 year warranty Maximum durability Multi-hit capability Standard black color Single curve WHAT IS INCLUDED: 1 Qty. Advanced Plate Carrier - no armor sold separately  Advanced Body Armor Plate Carrier Introducing the Advanced Plate Carrier from Body Armor Direct.  This is the best designed plate carrier for daily use. Simply add your patch and attachments and go.  We have this in stock and it ships same day! Features of Advanced Body Armor Plate Carrier: Black in Color One size fits all, fully adjustable Holds two 10" x 12" plates  Heavy duty drag handle Modular Plate Carrier 10 year warranty Maximum durability Multi-hit capability Standard black color Single curve WHAT IS INCLUDED: 1 Qty. Advanced Plate Carrier - no armor sold separately 

Qualities of 4 VIP Concealable T-Shirt Carriers Maximum concealability Comfortable for all day wear 4 way stretch material Provides overlapping side coverage Front and back internal pouch to hold soft armor panels Adjustable strap on sides to hold armor in place What's Included 4 Qty. T-Shirt Carriers in Color Black or White No armor, it is sold separately Body Armor Direct 4 VIP Concealable T-Shirt Carriers Our VIP Concealable T-Shirt Carriers hold our Light, Lighter or Lighter soft armor. Super lightweight design, stretch compression material, and maximum versatility makes this carrier extremely popular with military veterans, security personnel, public safety officers, and private citizens looking for dependable everyday gear. Purchasing these 4 T-Shirt Carriers gives you 5 total T-Shirts for the week to wear when you purchase the complete VIP Multi-Threat Vest with armor  Qualities of 4 VIP Concealable T-Shirt Carriers Maximum concealability Comfortable for all day wear 4 way stretch material Provides overlapping side coverage Front and back internal pouch to hold soft armor panels Adjustable strap on sides to hold armor in place What's Included 4 Qty. T-Shirt Carriers in Color Black or White No armor, it is sold separately

FEATURES: Maxx-Dri Technology offers 100% breathability compared to traditional PCs Ultra Lightweight Ultra Fast Donning and Doffing Ideal for donning over a Police Uniform Lightning Fast Infinity Adjustment System for a truly Custom Fit Anti-Gravity weight management technology Heavy Duty Mil-spec construction Heavy Duty Genuine YKK buckles and straps Molle and Velcro Molle front and rear Front Velcro for ID patches Heavy Duty Rear Drag/Rescue Handle Available with rifle and pistol mag pouches and pistol holster (chest) (2) LEVEL 3+ AR550 10x12 Shooters Cut Plates This plate carrier was designed by 221B Tactical SIZING: One Size Fits All (Adjustable Heavy Duty Genuine YKK Side Release Buckles and Straps) Spartan Armor AR550 Level III+ Body Armor and 221B Tactical Phantom Plate Carrier Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.  Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?  Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection. FEATURES: Maxx-Dri Technology offers 100% breathability compared to traditional PCs Ultra Lightweight Ultra Fast Donning and Doffing Ideal for donning over a Police Uniform Lightning Fast Infinity Adjustment System for a truly Custom Fit Anti-Gravity weight management technology Heavy Duty Mil-spec construction Heavy Duty Genuine YKK buckles and straps Molle and Velcro Molle front and rear Front Velcro for ID patches Heavy Duty Rear Drag/Rescue Handle Available with rifle and pistol mag pouches and pistol holster (chest) (2) LEVEL 3+ AR550 10x12 Shooters Cut Plates This plate carrier was designed by 221B Tactical SIZING: One Size Fits All (Adjustable Heavy Duty Genuine YKK Side Release Buckles and Straps)

Spartan AR550 Body Armor and Sentinel Plate Carrier Package Fits 38" to 48" chest size Durable emergency drag handle Anti-Slip shoulder padding w/ velcro Side release buckles on internal waist strap Padded mesh separators for the interior of carrier for breathability Removable cummerbund with side plate pockets for 6x6 and 6x8 side plate armor NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates! Velcro in front of the Carrier is 8x4 Velcro on the back of the Carrier is 9x3 Stronger carrier material that can withstand through wear and tear over a long period of time 1000 denier Bottom loading By purchasing you will receive: Set of Two 10x12 AR550 Body Armor Single Curve, Full Coat Set of Two AR550 Side Plates Base Coat One Sentinel Plate Carrier (your choice in color) Level III+ Side Plates:   6″ x 6″  Chest Plate Weight (per plate):   10x12 AR550 Shooters Cut Full Coat: 8lbs 10oz. Side Plate Weight (per plate):    6×6 approximately 2lbs 9oz (base coat) Thickness:   .25″ AR550 Spartan Armor Systems AR550 Level III+ Armor NIJ Certified with Spartan Sentinel Plate Carrier Package includes both front and back AR550 shooters cut steel armor plates with a single curve, with full coat of Encapsuloc™ anti-fragmentation coating, two 6x6 side plates (base coat) and Spartan Sentinel Plate Carrier. Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?  Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection. Spartan AR550 Body Armor and Sentinel Plate Carrier Package Fits 38" to 48" chest size Durable emergency drag handle Anti-Slip shoulder padding w/ velcro Side release buckles on internal waist strap Padded mesh separators for the interior of carrier for breathability Removable cummerbund with side plate pockets for 6x6 and 6x8 side plate armor NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates! Velcro in front of the Carrier is 8x4 Velcro on the back of the Carrier is 9x3 Stronger carrier material that can withstand through wear and tear over a long period of time 1000 denier Bottom loading By purchasing you will receive: Set of Two 10x12 AR550 Body Armor Single Curve, Full Coat Set of Two AR550 Side Plates Base Coat One Sentinel Plate Carrier (your choice in color) Buy Body Armor - Level III+ Spartan AR550 Armor We’ve taken our Level III Body Armor to a NEW level! Spartan Armor Systems™ is pleased to introduce our AR550 Body Armor!  With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated! Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates. Note: AR550 side plates are NIJ compliant, are not NIJ certified.  Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our  ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel is much harder than AR500, but not too hard to cause severe stress while forming. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Level III+ Side Plates:   6″ x 6″  Chest Plate Weight (per plate):   10x12 AR550 Shooters Cut Full Coat: 8lbs 10oz. Side Plate Weight (per plate):    6×6 approximately 2lbs 9oz (base coat) Thickness:   .25″ AR550

Sentinel Legion XL Plate Carrier Specs:  Durable Emergency Drag Handle Anti-slip Shoulder Padding With Velcro Side Release Buckles On The Internal Waist Strap Elevated Mesh Allowing For Extreme Breathability  Holds 11"X14" Front And Back Plates Removable Cummerbund With Side Plate Pockets For 6"X6" And 6"X8" Armor Velcro In Front Of The Carrier Is 8"x4" With A Velcro Loop On Each Side Velcro On The Back Of The Carrier Measures 9x3 Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time 1000 Denier Bottom Loading Weighs Approximately 3lbs. 9oz. Shooters Cut Plate Weight (per plate):. 11”x14” AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness Side Plate Weight (per plate):     6×6 approximately 2lbs 9oz (base coat) or 2lbs 11oz (full coat) 6×8 approximately 3lbs 6 oz (base coat) or 3lbs 12oz (full coat) AR550 Body Armor - Shooters Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only SPARTAN ARMOR SYSTEMS® SENTINEL LEGION XL PLATE CARRIER  The Spartan Armor Systems® Legion XL Plate Carrier is rugged, reliable, and fully adjustable from 2XL-4XL. Designed to hold our 11”x14” body armor plates, the Legion XL can also accommodate 6”x6” or 6”x8” side plates for additional protection and features a completely removable cummerbund. Developed For You Born of numerous customer inquiries and feedback, we developed the Sentinel Legion XL Plate Carrier to be adjustable from a 2XL-4XL size. The Sentinel Legion XL weighs in at approximately 3lbs. 9oz., will hold our Steel Core AR500 Omega and AR550 11”x14” body armor plates, while also offering the option to add in 6"x6" or 6"x8" side plates. If you don't want to run the Sentinel Legion XL with the cummerbund - no sweat! The cummerbund is easily removable so you can run your plate carrier with just the front and back plates or the full set-up with side plates. Comfort And Convenience The Spartan Armor Systems® Legion XL Plate Carrier includes features designed for customization, modularity, and comfort while affording supreme protection in the field. Anti-slip shoulder padding with velcro, side release buckles on the waist strap, and elevated mesh for breathability make this one big, bad, carrier.  Sentinel Legion XL Plate Carrier Specs:  Durable Emergency Drag Handle Anti-slip Shoulder Padding With Velcro Side Release Buckles On The Internal Waist Strap Elevated Mesh Allowing For Extreme Breathability  Holds 11"X14" Front And Back Plates Removable Cummerbund With Side Plate Pockets For 6"X6" And 6"X8" Armor Velcro In Front Of The Carrier Is 8"x4" With A Velcro Loop On Each Side Velcro On The Back Of The Carrier Measures 9x3 Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time 1000 Denier Bottom Loading Weighs Approximately 3lbs. 9oz. NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates. SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SET OF TWO Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Protective Value Added  We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.  Battle Hardened Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process. Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo. IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation. Blazing The Trail of Innovation Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Shooters Cut Plate Weight (per plate):. 11”x14” AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness   Side Plate Weight (per plate):     6×6 approximately 2lbs 9oz (base coat) or 2lbs 11oz (full coat) 6×8 approximately 3lbs 6 oz (base coat) or 3lbs 12oz (full coat)   AR550 Body Armor - Shooters Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See a Comparison of Our Full Line of Body Armor: Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations: Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.  

Advanced plate carrier that is feature packed 500 Denier  Front Top Zippered Admin Pouch Front Lower Velcro kangaroo pouch PALS web attachment points covering the front, back and shoulders of the vest Mil spec laser cut PALS Webbing on the shoulders Cummerbund is designed to hold a 5"x15" IIIA soft armor inside each side. Cummerbund has a proprietary retained shock cord system to allow stretch while being held in place to stop sagging. Cummerbund is removable and the carrier is equipped with removable quick release buckles Genuine US Mil Spec Webbing Velcro on the back Drag Handle keeps it in place Heavy Duty bar tacking at key stress points Communication or hydration hose guides  Padded Front and back interior of carrier with airflow channels sewn in Front and back areas of Velcro for identifiers Bottom Loading Plate Pockets accepts 10x12, SAPI and Similar Armor All pieces Made in USA, assembled in Mexico *Note* This plate carrier by itself will only hold 5x15 Soft Armor Panels, this package will come with a molle system to attach on your 6x6 or 6x8 side plates.  Leonidas Plate Carrier System with AR550 Omega Body Armor  The Leonidas plate carrier is an advanced plate carrier system is fit for a Spartan King, hence the name "Leonidas". This versatile plate carrier hosts a wide variety of proven features including a removable cummerbund. When you are looking for the toughest plate carrier available to take into battle this is it. Take a look at all the features below. Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.  Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?  Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.  Advanced plate carrier that is feature packed 500 Denier  Front Top Zippered Admin Pouch Front Lower Velcro kangaroo pouch PALS web attachment points covering the front, back and shoulders of the vest Mil spec laser cut PALS Webbing on the shoulders Cummerbund is designed to hold a 5"x15" IIIA soft armor inside each side. Cummerbund has a proprietary retained shock cord system to allow stretch while being held in place to stop sagging. Cummerbund is removable and the carrier is equipped with removable quick release buckles Genuine US Mil Spec Webbing Velcro on the back Drag Handle keeps it in place Heavy Duty bar tacking at key stress points Communication or hydration hose guides  Padded Front and back interior of carrier with airflow channels sewn in Front and back areas of Velcro for identifiers Bottom Loading Plate Pockets accepts 10x12, SAPI and Similar Armor All pieces Made in USA, assembled in Mexico *Note* This plate carrier by itself will only hold 5x15 Soft Armor Panels, this package will come with a molle system to attach on your 6x6 or 6x8 side plates.  Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our  ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel perfectly hits the “sweet spot”. It’s much harder than AR500, but not too hard to cause severe stress while forming. Our AR550 Spartan Body Armor now has the option of Advanced Triple Curve (ATC). An industry FIRST! Spartan Armor Systems™ is proud to be the FIRST in the industry to commercially offer triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!  Configuration:   This armor comes as a pair, meaning you will receive both front and back plates, and optional side plates Level III+ Side Plates:   Choose from either 6″ x 6″ (small) or 6″ x 8″ (large) Full Coat or Base Coat Options:  We are excited to announce our potentially “life saving” breakthrough!  The strike face for our plates is mark embedded with our Spartan logo! Both sides of these plates are coated, however, the back side only has a “courtesy coat” to protect against wear and rust. The front of the plate is lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™.  The result is a plate approximately 1/2-5/8” total thickness.  See our FAQ for more information about our Encapsaloc ™ process. By purchasing, you will receive (2) Formed Spartan™ Omega™ AR500 Body Armor 10″x12” chest plates.  Due to popular demand, we have added a “base coat” only option for our AR500 Omega™ armor products. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities.

When purchasing this package you will receive: (1) Achilles Plate Carrier (Black, Coyote Brown, OD Green) (2) 10x12 Spartan™ Omega™ AR500 Body Armor Shooters Cut Chest/Back Plates, Single Curve, Base Coat (2) 6x6 Spartan™ Omega™ AR500 Body Armor Side Plates, Curved, Base Coat You have the choice of 6x8 side plates, upgrade to Advanced Triple Curved™ ATC™, and upgrade to full coat for fragmentation mitigation on the package.  SPARTAN ARMOR SYSTEMS® ACHILLES LASER CUT PLATE CARRIER   Product Overview The Achilles Laser Cut Plate Carrier pays homage to the legendary Greek warrior, Achilles, a great hero of the Trojan War. Lightweight, durable, and highly adaptable the Achilles carrier is designed for the modern-day multi-role warrior. Comprised of lightweight 1000 Denier laser-cut Molle and featuring comfortable padded shoulder straps and padded front and rear sections with ventilation vents, Spartan Armor Systems® has also enhanced the capability of the Achilles Laser Cut Plate Carrier by adding our top-zippered admin pouch above a convenient kangaroo pouch that comes with removable triple M4 mag pouches.   Added Comfort And Capability Capability and comfort keep you in the fight longer. The Achilles Laser Cut Plate Carrier will accept both 10"x12" and 11"x14" body armor. For example, to increase comfort and protection it is possible to run our Flex Fused Core IIIA soft armor behind steel core plates such as our III+ AR550 10"x12" body armor utilizing the dual-chamber system! The cummerbund accepts side plates (6”x6” or 6"x8") and is modular/removable, with the inclusion of the built-in 2-inch quick-release straps. The configuration and customization options with the Achilles Laser Cut Plate Carrier are endless. Achilles Laser Cut Plate Carrier Specs:  1000 Denier Materials Lightweight And Duty 1000 Denier Laser Cut Molle Zippered Admin Pouch Kangaroo Pouch With Removable Triple M4 Pouches Padded Shoulder Pads Padded Front And Rear With Ventilation Vents Low Profile Drag Handle Molle Velcro Front And Rear For Identifier Patches 2-inch Replaceable Quick-release Buckles Accepts 10"X12" And 11"X14" Body Armor 6"X6" And 6"X8" Side Plates Fits S To XL SPARTAN™ OMEGA™ AR500 BODY ARMOR SHOOTERS CUT SET OF TWO   Product Overview Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. Spartan™ Omega™ AR500 plates provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.    Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.    Exceptional Comfort & Engineering You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.    Chest Plate Weight (per plate):  10"x12" Plate: Base Coat 8lbs 10oz. Full Coat 9lbs 11oz. Side Plate Weight (per plate): 6×6 approximately 2lbs 1oz (base coat) or 2lbs 15oz (full coat) 6×8 approximately 3lbs 10oz (base coat) or 3lbs 14oz (full coat) Additional Spartan™ Omega™ AR500 Body Armor - Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.       *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.     See A Comparison of Our Full Line of Body Armor:

Ultra-concealable under clothing Side opening design Lightweight breathable water repellent outside carrier that is machine washable Moisture-wicking, anti-microbial inner liner which draws moisture away from the body for faster cool-down 4-point adjustable strapping system on the shoulders and waist Dual 6 x 8 and 7 x 9 front plate pockets for optional trauma plate sold separately Low profile loop for less bulkiness and reduced friction against clothin WHAT IS INCLUDED: 1 Qty. Uniform Carrier 1 Qty. set of front and back soft armor that fully wrap the sides Uniform Style Multi-Threat Vest Introducing our Uniform Shirt Vest Government Certified Bullet Resistant Vest Level that stops all common handgun rounds including .357, 9mm, 45acp all the way up to 44 magnum following the National Institute of Justice accreditation standard 0101.06. Fragmentation special threat performance. Protection from a knife slash. The vest is 100%  Made in the USA for YOU by hard working Americans using mostly sewing machines. This vest includes our lightest and thinnest Certified Level IIIA ballistics.   The vest is worn by law enforcement, private security and any adult  that needs protection. Over 75 five star reviews at the very bottom of this page - Our customers love it! In June of 2020 we introduced new removable inserts for our soft armor that are lower in weight. Now we offer our standard weight as light and the new lighter and lightest options. All are Certified Level IIIA by the National Institute of Justice with similar performance. In the world of body armor the more you spend the less in weight it gets. Our Lightest option is the best by far! Ultra-concealable under clothing Side opening design Lightweight breathable water repellent outside carrier that is machine washable Moisture-wicking, anti-microbial inner liner which draws moisture away from the body for faster cool-down 4-point adjustable strapping system on the shoulders and waist Dual 6 x 8 and 7 x 9 front plate pockets for optional trauma plate sold separately Low profile loop for less bulkiness and reduced friction against clothing  Weight in Lbs.  Size Light Lighter Lightest Sq. Inches of Ballistics Small 5.6 4.3 3.1 374 Medium 6.2 4.7 3.4 421 Large 6.5 5.0 3.6 447 XL 6.9 5.3 3.8 481 2XL 7.2 5.5 4.0 504 3XL 8.2 6.3 4.5 588 4XL 8.7 6.7 4.8 631 5XL 9.8 7.5 5.4 707    Thinness Light 0.35 inch Lighter 0.25 inch Lightest 0.21 inch WHAT IS INCLUDED: 1 Qty. Uniform Carrier 1 Qty. set of front and back soft armor that fully wrap the sides

What’s Included Freedom Concealable Vest All Star Tactical Carrier VIP T-Shirt Carrier Front and Back IIIA Soft Armor Inserts Body Armor Direct Bundle #1: Freedom Concealable Vest, All Star Tactical Carrier and VIP T-Shirt Carrier This Armor Bundle includes our Freedom Concealable Vest, All Star Tactical Carrier, and our VIP T-Shirt as well as front and back NIJ Certified Soft Armor Inserts. The soft inserts are available in three different weight/thickness options and are easily interchangeable between all of the included carriers. The armor protects the front back and wraps the sides of your body.  This bundle includes carriers designed for an array of situations. The ultra sleek VIP T-Shirt for when you want to be covered without divulging you’re wearing armor. The Freedom Concealable Vest is also inconspicuous with its low profile but in a more traditional package capable of holding hard armor inserts. The All Star Tactical Carrier is your MOLLE compatible high performance carrier option with front and back pockets for hard armor inserts in conjunction with the included soft armor for added ballistic coverage. What’s Included Freedom Concealable Vest All Star Tactical Carrier VIP T-Shirt Carrier Front and Back IIIA Soft Armor Inserts  Specifications Size Light (.35”) Lighter (.25”) Lightest (.21”) Sq. Inches of Ballistics Small 5.6 lbs 4.3 lbs 3.1 lbs 374” Medium 6.2 lbs 4.7 lbs 3.4 lbs 421” Large 6.5 lbs 5.0 lbs 3.6 lbs 447” XL 6.9 lbs 5.3 lbs 3.8 lbs 481” 2XL 7.2 lbs 5.5 lbs 4.0 lbs 504” 3XL 8.2 lbs 6.3 lbs 4.5 lbs 588” 4XL 8.7 lbs 6.7 lbs 4.8 lbs 631” 5XL 9.8 lbs 7.5 lbs 5.4 lbs 707”