On Sale Now

SPECIFICATIONS Thickness: 0.5" steel Note: Our targets are manufactured to accept 3/8 inch carriage bolts AR500 Armor® 1/2" Steel Target - 9" x 16.5" A-Zone AR500 Armor® is proud to offer our AR500 Armor® Steel Targets for sale. AR500 Armor® provides consumers access to the best Steel Targets made of quality ½” steel. These steel targets were built from the ground up to be an affordable and dependable option for serious and casual shooters alike. The AR500 Armor® 9” x 16.5” An A-Zone target is essential for shooters looking to enhance their tactical shooting skills on a realistic target. All of the AR500 Armor® Steel Targets are manufactured in the USA and meet strict quality control guidelines, making AR500 Armor® your #1 choice when you’re looking for steel silhouette targets for sale. Whether you are looking for steel targets shaped like gongs, silhouettes, or something a little different, all of our steel targets are rated to handle even the heaviest of common firearm calibers. These ½” AR500 Armor® Steel Plate Targets are rated for use with the most common pistol calibers at a distance of no less than 7 meters and the most common rifle calibers at a distance of no less than 50 meters. We strongly discourage the use of steel core ammunition. As always, be safe out there, always be situation-aware, and understand that spall and frag are always a danger with uncoated ballistic steel targets. Respect your distances and your aim points. SPECIFICATIONS Thickness: 0.5" steel Note: Our targets are manufactured to accept 3/8 inch carriage bolts  

SPECIFICATIONS Thickness: 0.5" steel Note: Our targets are manufactured to accept 3/8 inch carriage bolts AR500 Armor® 1/2" Steel Target - Silhouette AR500 Armor® is proud to offer our AR500 Armor® Steel Targets for sale. AR500 Armor® provides consumers access to the best Steel Targets made of quality ½” steel. These steel targets were built from the ground up to be an affordable and dependable option for serious and casual shooters alike. The AR500 Armor® silhouette target is essential for shooters looking to enhance their tactical shooting skills on a realistic target. All of the AR500 Armor® Steel Targets are manufactured in the USA and meet strict quality control guidelines, making AR500 Armor® your #1 choice when you’re looking for steel silhouette targets for sale. Whether you are looking for steel targets shaped like gongs, silhouettes, or something a little different, all of our steel targets are rated to handle even the heaviest of common firearm calibers. These ½” AR500 Armor® Steel Plate Targets are rated for use with the most common pistol calibers at a distance of no less than 7 meters and the most common rifle calibers at a distance of no less than 50 meters. We strongly discourage the use of steel core ammunition. As always, be safe out there, always be situationally aware, and understand that spall and frag are always a danger with uncoated ballistic steel targets. Respect your distances and your aim points. SPECIFICATIONS Thickness: 0.5" steel Note: Our targets are manufactured to accept 3/8 inch carriage bolts

Highlights: Peace of Mind: Offers the extra protection of our Level III plate or Level IIIA hybrid soft armor panels. Comfort: Designed to flex independently of the plate carrier, allowing for moving, kneeling, or changing positions AR500 Armor ABS Pouch AR500 Armor® ABS Pouch was developed to satisfy the growing demand for modular protection of the abdominal area. In situations where extended protection is desired, the ABS pouch has got you covered. Abdominal protection that maintains mobility The ABS pouch attaches to your plate carrier using the Velcro integrated into the cummerbund flap or inside of the plate pocket. A large attachment flap allows for user adjustable extension of your armor for a precise fit. PALS webbing on the front allows for attaching small MOLLE-compatible pouches (though we recommend something small and light to maintain mobility) Highlights: Peace of Mind: Offers the extra protection of our Level III plate or Level IIIA hybrid soft armor panels. Comfort: Designed to flex independently of the plate carrier, allowing for moving, kneeling, or changing positions

Highlights Versatile: works with our Veritas and Testudo Gen 2 plate carriers  Confidence: your armor is secure via adjustable security retention straps Durable: made with genuine 500D Cordura® nylon and Vecro® for long life AR500 Armor Adaptive Plate Insert If you’re looking for a solution to reduce armor size in your AR500 Armor Testudo Gen 2, Testudo lite, Veritas, or Veritas Lite plate carrier, consider our Adaptive Plate Insert Reduce weight while maintaining the most vital protection Our Adaptive Plate Insert, formerly known as the Trauma Plate Insert, dramatically increases versatility by allowing you to easily create an in-conjunction armor system, reduce armor size, or add soft or hard trauma plates for heart and vital organ coverage. One example of a lightweight, smaller armor rig would be to run Hybrid IIIA 10”x12” body armor in your Veritas plate carrier and use the Adaptive Plate Insert with AR500 Armor® III+ lightweight 6”x8” armor as a trauma plate/speed plate to maintain coverage of your heart. The Adaptive Plate Insert is compatible with both front & rear pockets, and accommodates 6” x 6”, 6” x 8”, and 8” x 10” ceramic, steel, or polyethylene armor, trauma plates, or speed plates. Simply attach the insert to the attachment panel on the inner pocket of your Veritas™ or Testudo™ (Gen 2) plate carrier for your custom configured armor setup. Our Adaptive Plate Insert will place your body armor at the top of the plate carrier for the ideal right height and does have room for adjustment to ensure a perfect fit. Inner plate retention straps and guides ensure a secure armor fit with all compatibles sizes. Highlights Versatile: works with our Veritas and Testudo Gen 2 plate carriers  Confidence: your armor is secure via adjustable security retention straps Durable: made with genuine 500D Cordura® nylon and Vecro® for long life

SPECIFICATIONS Dimensions: 8" x 2.5" x 1" Weight: 1.6 ounces Compatibility: Invictus Carrier AR500 Armor AR Invictus Quick Release System The AR Invictus Quick Release System attaches to the shoulders and cummerbund and allows the carrier to fall free from the body when needed. It is constructed using ITW Nexus D-rings and one-inch webbing with Bar tack stitching for durability when it counts.  SPECIFICATIONS Dimensions: 8" x 2.5" x 1" Weight: 1.6 ounces Compatibility: Invictus Carrier

Highlights: Peace of mind: helps reduce backface deformation signature with soft armor Confidence: absorbs and dissipates impact energy Comfort: ultralight Approximate Weight: 6” x 8” Side Plate Cut – 2.3 ounces 9.5" x 6" ABS Cut - 2.8 ounces 9" x 9" – 3.3 ounces 10” x 12” ASC – 5.7 ounces 11” x 14” ASC – 7.4 ounces 11” x 15” Backpack Cut – 7.6 ounces AR500 Armor Blunt Force Trauma Pad When a bullet strikes body armor, the energy from the impact is transferred to the armor. What happens to the armor depends on the type and material. Soft armor flexes and “catches” the bullet, whereas hard armor can either shatter the bullet (steel), dissipate the force by breaking apart (ceramic) or capture the bullet by melting around it (polyethylene). All AR500 Armor® in standalone configurations perform very well in tests against back face deformation (BFD) and energy transfer and are designed with BFD in mind.  Helps dissipate energy transfer Each trauma pad is specially engineered to mitigate blunt force trauma in case your armor takes a round and reduces the amount of back face deformation that could occur, which can mitigate the risk of injury after impact.  Designed to be worn in conjunction with and behind your body armor, our Trauma Pads reduce the amount of energy transfer to your body, reducing felt energy through your armor. Our patented Advanced Shooters Cut (ASC) matches perfectly to our Level IIIA, III, III+, and III+ Lightweight body armor improving ergonomics with your rifle. Compatible with AR500 Armor® body armor and most other armor systems and plate carriers. Highlights: Peace of mind: helps reduce backface deformation signature with soft armor Confidence: absorbs and dissipates impact energy Comfort: ultralight Approximate Weight: 6” x 8” Side Plate Cut – 2.3 ounces 9.5" x 6" ABS Cut - 2.8 ounces 9" x 9" – 3.3 ounces 10” x 12” ASC – 5.7 ounces 11” x 14” ASC – 7.4 ounces 11” x 15” Backpack Cut – 7.6 ounces Trauma pads are non-ballistic and offer no increase in ballistic protection.

Hardware Included: (2) 1' 5/16" Chain (2) 3" x 3/8" Carriage Bolts (2) 1 1/2" x 3/8" Carriage Bolts (4) 3/8" Flat Washers (4) 3/8" Lock Washer (4) 3/8" Wingnuts AR500 Armor Chain Hardware Kit (for hanging targets) Built to last, our high-grade steel chains were selected for both quality and cost.  Hardware Included: (2) 1' 5/16" Chain (2) 3" x 3/8" Carriage Bolts (2) 1 1/2" x 3/8" Carriage Bolts (4) 3/8" Flat Washers (4) 3/8" Lock Washer (4) 3/8" Wingnuts

Highlights Confidence: Reinforced bar-tack stitching and genuine Cordura for long life. Peace of mind: Reinforced opening and genuine Velcro offer spacious capacity with secure closure. Malice Clips: one short (small) malice clip AR500 Armor Dump Pouch If you’re on the range and needing a pouch to hold spent mags, the AR500 Armor® Dump Pouch is a compact pouch with a big appetite Not too big. Not too small. Just right. Some dump pouches are very compact but have almost no form or shape to them, making it difficult to access the pouch quickly. Other pouches are very large and take up way too many PALS or belt real-estate.Our dump pouch combines the best of both worlds, with a rigid opening to aid access and a Velcro® closure to aid retention yet small enough to be almost unnoticeable until you need it. The genuine 500D Cordura® pouch sports a generous 7” diameter and 9” deep pouch that has plenty of room for magazines, equipment, or small gear.  It comes with a MALICE CLIP® to attach to your MOLLE-compatible platform, and weighs only 3 ounces. Highlights Confidence: Reinforced bar-tack stitching and genuine Cordura for long life. Peace of mind: Reinforced opening and genuine Velcro offer spacious capacity with secure closure. Malice Clips: one short (small) malice clip

SPECIFICATIONS Dimensions: 5.5" x 2" x 2" Weight: 3.2 ounces AR500 Armor Economy Sling If you're looking for a basic sling for your rifle that won't break the bank, the Economy Sling 2-point adjustable sling is what you need. Rifle retention, value-priced Our economy sling is a value-priced but highly adaptable sling usable on a wide array of long guns, from AR-15 style rifles to shotguns. Made of 1.5" webbing for the body, 1" webbing at the connection ends, and paracord for the attachment loops, our sling is a lightweight, compact method to keep your long gun attached to your body. SPECIFICATIONS Dimensions: 5.5" x 2" x 2" Weight: 3.2 ounces

Trauma Kit Contents: (1) Combat Application Tourniquet (CAT) (1) Foxseal Chest Seals (two per package) (1) H&H Chest Needle Decomp (14 gauge 3.25”) (1) Hemostatic Agent (1) Compressed Gauze Highlights Peace of mind: features contents designed for penetrating injuries Confidence: keep-it-simple instructions and kit contents Durable: genuine Cordura® and Hypalon® pull-tabs Malice Clips: two short (small) malice clips AR500 Armor Empty Small of Back IFAK The AR500 Armor® Lower Back IFAK Pouch is perfect for those looking for a multi-function medical kit storage solution. Belt or bag, your choice The LBIFAK pouch is a two-piece med kit pouch designed to be worn on the belt in the small of the back. A pull on the Hypalon tab removes the insert from the mounting base, giving you immediate access to your IFAK contents (sold separately).In addition, the mounting base has laser-cut Hypalon so you can attach the pouch to a plate carrier, bag, or other MOLLE-compatible platform using the included MALICE CLIPS®. The LPIFAK is 8.5”x4.5” and weighs only 4 ounces. If you don’t have an IFAK already, we have designed a comprehensive medical kit that goes perfectly with our LBIFAK pouch. Vacuum Sealed Lower Back IFAK The AR500 Armor® Vacuum Sealed LBIFAK refill contains the necessities to combat severe trauma wounds, with an emphasis on bleeding sustained from gunshots or knives. Full-size medical kit in a vacuum-sealed, compact package. Using Keep It Simple principles we’ve designed this trauma kit for use by anyone with basic knowledge of compressing a wound or using a tourniquet. The chest needle decomps and chest seals provide necessities for advanced users and additional capability. Pre-Notched deployment point and kit contents along with expiration date are clearly labeled for quick identification and ease of use. Our heavy-duty textured laminate adds grip and allows for improved durability and greater compression via our industrial vacuum sealer. Our laminate was chosen for the perfect balance of durability and tear resistance for reliable deployment.  Trauma Kit Contents: (1) Combat Application Tourniquet (CAT) (1) Foxseal Chest Seals (two per package) (1) H&H Chest Needle Decomp (14 gauge 3.25”) (1) Hemostatic Agent (1) Compressed Gauze Highlights Peace of mind: features contents designed for penetrating injuries Confidence: keep-it-simple instructions and kit contents Durable: genuine Cordura® and Hypalon® pull-tabs Malice Clips: two short (small) malice clips

The Firebird features plenty of storage for your laptop and other personal gear.  The generously sized primary compartment features a laptop sleeve, compatible with nearly all laptops. Perfect for all-around general use. Hypalon® accented front upper pocket is designed for compatibility with the largest smartphones on the market, including their cases The large front lower pocket is complete with a key lanyard with hook, and retention pockets for pens and other accessories. It will easily accommodate a full-sized pistol for concealment.  The lined top pocket is located right next to the backpack drag handle. This pocket is lined on the inside with a non-scratch soft fabric and is ideal for storing your sunglasses, wallet, keys, or other accessories. Highlights Confidence: stops bullets used in 95% of gun-related homicides Discreet: multiple low-profile colors available  Peace of mind: protect the entire family Features Durable zippers with Hypalon® pull tabs Padded rear backing for comfort, and padded fully adjustable backpack straps High traction Hypalon bottom is abrasion and water-resistant Compartments & pockets Primary Compartment: 18” x 15” x 5" (with laptop sleeve) Front Upper Pocket: 4.5” x 8” Front Lower Pocket: 6” x 10”  Top Pocket: 8” x 8” Integrated Body Armor: Pistol Rated - Built-In Body Armor Level IIIA integrated soft armor: Rated to defeat 6 rounds of .44 Magnum, and .357 Sig at 1,430 feet per second Protective and lightweight anti-microbial and water-resistant rip-stop laminate cover Backpack + 11” x 15” soft armor: Less than 3lbs Shelf life: 5 years Rifle Rated - Built-In Body Armor Level III+ Lightweight integrated steel armor: Rated to defeat calibers up to 5.56x45 M193, 5.56x45 M855/SS109 at 3,000 FPS (+/- 30FPS) and 7.62x39 and 7.62x51 NATO Backpack + 11” x 15” steel armor (base coat): 10.05 pounds  Shelf life: 20 years AR500 Armor Firebird Armored Backpack (11"x15" Panel) Looking for a functional item you can take practically anywhere and which will stop 95% of the rounds used in shooting incidents but want something larger than our Phoenix armored backpack? Look no further than our Firebird Armored Backpack. An invisible shield, always available Like the Phoenix, the AR500 Armor® Firebird Armored Backpack is built to stop the bullets used in 95% of gun-related homicides. Nobody will know your backpack doubles as a lifesaving tool. The Firebird is a low-profile armor system designed to stop the ammunition used in the majority of shootings but provides more armor coverage than the standard Phoenix Armor Backpack. Made from 1000 Denier Cordura, the Firebird weighs less than 3 pounds in its lightest configuration and comes ready to use. The armor is sewn into the pack, so you never have to worry about forgetting to install your armor or having it shift during use. The Firebird features plenty of storage for your laptop and other personal gear.  The generously sized primary compartment features a laptop sleeve, compatible with nearly all laptops. Perfect for all-around general use. Hypalon® accented front upper pocket is designed for compatibility with the largest smartphones on the market, including their cases The large front lower pocket is complete with a key lanyard with hook, and retention pockets for pens and other accessories. It will easily accommodate a full-sized pistol for concealment.  The lined top pocket is located right next to the backpack drag handle. This pocket is lined on the inside with a non-scratch soft fabric and is ideal for storing your sunglasses, wallet, keys, or other accessories. Highlights Confidence: stops bullets used in 95% of gun-related homicides Discreet: multiple low-profile colors available  Peace of mind: protect the entire family Features Durable zippers with Hypalon® pull tabs Padded rear backing for comfort, and padded fully adjustable backpack straps High traction Hypalon bottom is abrasion and water-resistant Compartments & pockets Primary Compartment: 18” x 15” x 5" (with laptop sleeve) Front Upper Pocket: 4.5” x 8” Front Lower Pocket: 6” x 10”  Top Pocket: 8” x 8” Integrated Body Armor: Pistol Rated - Built-In Body Armor Level IIIA integrated soft armor: Rated to defeat 6 rounds of .44 Magnum, and .357 Sig at 1,430 feet per second Protective and lightweight anti-microbial and water-resistant rip-stop laminate cover Backpack + 11” x 15” soft armor: Less than 3lbs Shelf life: 5 years Rifle Rated - Built-In Body Armor Level III+ Lightweight integrated steel armor: Rated to defeat calibers up to 5.56x45 M193, 5.56x45 M855/SS109 at 3,000 FPS (+/- 30FPS) and 7.62x39 and 7.62x51 NATO Backpack + 11” x 15” steel armor (base coat): 10.05 pounds  Shelf life: 20 years The Trauma Pad Option: AR500 Armor® Trauma Pads are designed to decrease the blunt force energy felt upon impact when worn behind body armor. Our trauma pads feature non-Newtonian layers which instantly harden upon impact, creating a larger rigid surface area decreasing energy transfer, and increasing absorption throughout the trauma pad. When you choose to add a trauma pad, we will hand sew the trauma pad properly in place within The Phoenix Armored Backpack, no work or installation on your part is required. Trauma pads are ultra-lightweight, adding merely 5.9 ounces for 10” x 12” or 6.5 ounces for 11” x 15”.

Highlights: Light: weighs only 3.2 ounces Durable: premium materials bar-tacked in stress points Malice Clips: two long (large) malice clips AR500 Armor General Purpose Pouch-Blach Looking for a general-purpose pouch that won’t break the bank? Here you go. A pouch for all the things Our general purpose pouch is a rugged, 6.5”x6”x3” MOLLE-compatible pouch large enough to store most smaller items like GPS, small binos, and even candy bars. Comes with an internal divider and elastic for securing things like chemlights or for use as dummy-cord anchor points. The zipper opens 1/2-way so your contents won’t dump all over the place, and the pouch comes with a Velcro® patch panel for your blood type, motivational, or other patches. Comes with two long MALICE CLIPS® to attach to your MOLLE-compatible plate carrier, backpack, chest rig, etc. Highlights: Light: weighs only 3.2 ounces Durable: premium materials bar-tacked in stress points Malice Clips: two long (large) malice clips *AR500 patch not included

SPECIFICATIONS Thickness: 0.5" steel Note: Our targets are manufactured to accept 3/8 inch carriage bolts Small Bundle Includes: 1x AR500 1/2" Steel Target - 6" Gong 1x AR500 1/2" Steel Target - 4" Gong Full Bundle includes: 1x AR500 1/2" Steel Target - 12" Gong 1x AR500 1/2" Steel Target - 10" Gong 1x AR500 1/2" Steel Target - 8" Gong 1x AR500 1/2" Steel Target - 6" Gong 1x AR500 1/2" Steel Target - 4" Gong AR500 Armor 1/2" 4-piece steel target bundle AR500 Armor® is proud to offer our AR500 Armor® Steel Targets for sale. AR500 Armor® provides consumers access to the best Steel Targets made of quality ½” steel to ensure longevity. This six-piece bundle is the ultimate bundle to hone your skills, providing you with an excellent selection from AR500 Armor®'s steel targets. All of the AR500 Armor® Steel Targets are manufactured in the USA and meet strict quality control guidelines, making AR500 Armor® your #1 choice when you’re looking for unique steel targets for sale.These ½” AR500 Armor® Steel Plate Targets are rated for use with the most common pistol calibers at a distance of no less than 7 meters and the most common rifle calibers at a distance of no less than 50 meters. We strongly discourage the use of steel core ammunition. As always, be safe out there, always be situation-aware, and understand that spall and frag are always a danger with uncoated ballistic steel targets. Respect your distances and your aim points. SPECIFICATIONS Thickness: 0.5" steel Note: Our targets are manufactured to accept 3/8 inch carriage bolts Small Bundle Includes: 1x AR500 1/2" Steel Target - 6" Gong 1x AR500 1/2" Steel Target - 4" Gong Full Bundle includes: 1x AR500 1/2" Steel Target - 12" Gong 1x AR500 1/2" Steel Target - 10" Gong 1x AR500 1/2" Steel Target - 8" Gong 1x AR500 1/2" Steel Target - 6" Gong 1x AR500 1/2" Steel Target - 4" Gong

SPECIFICATIONS Material: AR500 Ballistic steel core Protection:  Level III: 7.62 mm FMJ, steel jacketed bullets (M80) (9.6g & 2780 ft/s (+/- 30 ft/s)) Level III+ LW: 5.56x45 M193, 5.56x45 M855/SS109, AK-47, .308. Capability: Edge-to-edge multi-hit protection Size & Weight:  9.5" x 13" Level III, Base Coat (0.36” profile): 9.4 lbs Level III, Build-Up Coat (0.64” profile): 10.5 lbs Level III+ LW, Base Coat (0.32” profile): 7.5 lbs Level III+ LW, Build-Up Coat (0.57” profile): 9.2 lbs 11” x 15” Level III+ LW, Base Coat (0.28” profile): 9.5 lbs Level III+ LW, Build-Up Coat (0.88” profile) 11.4 lbs Shelf life: 20 years Compatibility: Most backpacks and laptop bags Manufactured: United States AR500 Armor Hard Backpack Armor AR500 Armor’s carrier loadouts were all designed to offer front-and-back rifle stopping power as well as a place to put magazines and medical kits- a true combat-ready package. But since not everyone can manage carrying this with them all the time, we’re also proud to offer that same higher-level rifle protection in a package you can incorporate into your everyday accessories. So if you’re looking for rifle coverage you can conceal and take more places, this is where to look. The Hard Backpack Armor (see specifications below) is the brother product to the soft backpack armor, making a trade of having a higher weight but being able to provide more protection: Independently tested to NIJ 0101.06 standards, the Level III version of this plate is rated to stop 7.62x51 M80 Ball (.308 win) at up to 2,780 fps, as well as all lesser threats, while the Level III+ version is rated to stop .223/.308 WIN rounds, 5.56 M855 penetrators, and 7.62x39/7.62x51/5.56 M193s all at velocities of up to 3,000 feet per second. As for weight, the Level III weighs 8.5 pounds while the Level III+ Lightweight weighs 9 - making both about the weight of two textbooks. Designed to fit directly in the main compartment of most backpacks, this plate can fit well without a dedicated department, but also is well accommodated by laptop pocket (in most cases alongside your laptop) or hydration pouch pocket. As such, it is ready to be brought with you to your next outing without the need for any other accessories - just your preferred backpack or travel bag will do. If you’re looking for another level of protection and won’t mind a bigger load, the Hard Backpack Armor will be right up your alley. SPECIFICATIONS Material: AR500 Ballistic steel core Protection:  Level III: 7.62 mm FMJ, steel jacketed bullets (M80) (9.6g & 2780 ft/s (+/- 30 ft/s)) Level III+ LW: 5.56x45 M193, 5.56x45 M855/SS109, AK-47, .308. Capability: Edge-to-edge multi-hit protection Size & Weight:  9.5" x 13" Level III, Base Coat (0.36” profile): 9.4 lbs Level III, Build-Up Coat (0.64” profile): 10.5 lbs Level III+ LW, Base Coat (0.32” profile): 7.5 lbs Level III+ LW, Build-Up Coat (0.57” profile): 9.2 lbs 11” x 15” Level III+ LW, Base Coat (0.28” profile): 9.5 lbs Level III+ LW, Build-Up Coat (0.88” profile) 11.4 lbs Shelf life: 20 years Compatibility: Most backpacks and laptop bags Manufactured: United States

Benefits Level III rifle rated for 7.62x51 M80 Ball (.308 win) @ 2,780 fps Independently tested to NIJ 0101.06 Level III+ and III+ Lightweight are rated for 5.56mm M193 ammo at 3,100 fps Level III 6” X 8” Side Plate – 3.5 pounds (± 10% for our FragLock coating) Level III+ 6x8 -  3.5 pounds (± 10% for our FragLock coating) Level III+ LW - 2.5 pounds (± 10% for our FragLock coating) Most independently reviewed and tested body armor in the world AR500 Armor® high hard specially treated ballistic steel core construction Rigorous quality control standards for consistency and performance Rugged and stress fracture resistant A minimally invasive forming process on Multi-Curved models preserves armor integrity 20-Year maintenance-free shelf life Unparalleled Multi-Hit and stand-alone performance Outlasts Ceramic, and Polyethylene Body Armor Made in the United States of America! AR500 Armor Hard Side Plate AR500 Armor® Side Body Armor is designed to be worn in side plate pouches that attach to a plate carrier system. Our 6"x8" side plates fit most side plate pockets and MOLLE pouches on the market. All AR500 Armor® Body Armor is 100% made in the USA and manufactured from our rugged and reliable ballistic core designed specifically for Armor applications. Side protection for when it counts Specifically designed to increase coverage on the peripherals of your plate carrier. AR500 Armor® Level III Side Armor Plates offer rifle-rated protection on the side of your plate carrier. Compatible with most plate carriers that include cummerbund mounted side plate pouches. Comes standard in the flat base coat configuration, with multi-curve and our proprietary FragLock build-up spall and frag mitigation coat available at a slight additional cost. Level III is rated to defeat 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 feet per second, and Level III+ and III+ Lightweight are rated for 5.56mm M193 ammo at 3,100 fps. Side plates are most applicable when increased armor coverage is desired from an entry or defensive standpoint. Non-squared-off shooting positions, traveling in vehicles, and situations, where fragmentation is a realistic threat, are scenarios where heavily running side body armor makes sense. Also good for trauma plates/speed plates When used with our Adaptive Plate Insert in conjunction with soft armor, our 6"x8" plates can be used as a rifle-rated trauma/speed plate, offering enhanced protection for your heart. Benefits Level III rifle rated for 7.62x51 M80 Ball (.308 win) @ 2,780 fps Independently tested to NIJ 0101.06 Level III+ and III+ Lightweight are rated for 5.56mm M193 ammo at 3,100 fps Level III 6” X 8” Side Plate – 3.5 pounds (± 10% for our FragLock coating) Level III+ 6x8 -  3.5 pounds (± 10% for our FragLock coating) Level III+ LW - 2.5 pounds (± 10% for our FragLock coating) Most independently reviewed and tested body armor in the world AR500 Armor® high hard specially treated ballistic steel core construction Rigorous quality control standards for consistency and performance Rugged and stress fracture resistant A minimally invasive forming process on Multi-Curved models preserves armor integrity 20-Year maintenance-free shelf life Unparalleled Multi-Hit and stand-alone performance Outlasts Ceramic, and Polyethylene Body Armor Made in the United States of America!

SPECIFICATIONS Dimensions: 6.25" x 7.87" x 1.75" Weight: 1 lb Malice Clips: Two long (large) malice clips Malice Clips Two long (large) malice clips IFAK Refill Kit contents 1 x SWAT-T 1 x Hyfin compact twin chest seal 1 x Celox EMS 1 x Responder Bandage 1 x Compressed Gauze 1 x Trauma Shears 1 x H&H Duct Tape 1 x NAR Bear Claw Gloves 1 x Casualty Card 1 x Marker AR500 Armor Individual First Aid Kit (IFAK) The AR500 Armor® Tactical IFAK is the standard for MOLLE-compatible medical kits designed with the sole purpose of treating traumatic bleeding injuries. Compact and portable Our Tactical IFAK pouch is compact, portable, and designed to be attached to your MOLLE compatible plate carrier, rifle bag, or backpack. When loaded with the AR500 Armor IFAK refill kit (sold separately), this kit will contain the necessary tools to treat life-threatening bleeding wounds such as gunshots, knife/stab wounds, or other serious bleeding injuries...including arterial bleeding).  The Tactical IFAK pouch can be unzipped quickly and features an adjustable retention cord that prevents the pouch from falling all the way open when unzipped, creating a stable platform that allows immediate access to your medkit.  Internal pockets and elastic straps offer plenty of storage options for your medical equipment. Three rows of Velcro®-covered PALS webbing on the front for mounting medical patches like the included medical patch. There are two rows of PALS webbing on the sides of the pouch for mounting small pouches or attaching tourniquets. Includes MALICE CLIPS® for mounting your MOLLE-compatible gear. If you don't have the medical gear to put in the pouch, you can add our IFAK Refill Kit (details below) and have everything you need to provide emergency aid for life-threatening bleeding wounds. SPECIFICATIONS Dimensions: 6.25" x 7.87" x 1.75" Weight: 1 lb Malice Clips: Two long (large) malice clips Malice Clips Two long (large) malice clips IFAK Refill Kit contents 1 x SWAT-T 1 x Hyfin compact twin chest seal 1 x Celox EMS 1 x Responder Bandage 1 x Compressed Gauze 1 x Trauma Shears 1 x H&H Duct Tape 1 x NAR Bear Claw Gloves 1 x Casualty Card 1 x Marker

SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States AR500 Armor Level III Body Armor Essential protection ought to be affordable and reliable, which is why AR500 Armor is proud to offer one of the most cost-effective plates on the market with our Steel Level III (specifications below): An AR500 Steel plate, cut in our patented Advanced Shooters Cut shape and design, and covered with an exclusive FragLock™ Coat, in Base and Build-Up forms.  Our Level III Steel, unlike ceramic or polyethylene alternatives, is capable of protecting against several direct hits while still being less bulky than competing materials. It also has been independently tested in accordance with NIJ 0101.06 threat levels through Oregon Ballistics (OBL), and H.P. White Laboratories. This means it is rated to stop 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS, and special threat tested to stop 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS. A benefit not elsewhere found in the industry, the Advanced Shooters Cut shape affords you additional room for your rifle stock, improving comfort and shooting ergonomics; this is available in right and left-handed configurations. It is also compatible with all standard plate carriers that accept SAPI or traditional Shooters Cut body armor, given there is an appropriately sized chest plate pocket. Finally, the FragLock™ Coat is a unique feature that guarantees two benefits: First, it gives a twenty-year maintenance-free shelf life - making this steel plate far outlast ceramic or polyethylene alternatives. Second, the coating mitigates the dangers of spalling (when pieces of steel fragment off) and fragmentation (when the bullet’s remains fragment off), protecting the wearer from both the direct ballistic impact and the aftermath of the impact. The Build-Up Coat features stronger protection with the tradeoff of greater weight and size, while the Base Coat is lighter and thinner with less protection. SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States

SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States AR500 Armor Level III Body Armor With Build Up Coat Essential protection ought to be affordable and reliable, which is why AR500 Armor is proud to offer one of the most cost-effective plates on the market with our Steel Level III (specifications below): An AR500 Steel plate, cut in our patented Advanced Shooters Cut shape and design, and covered with an exclusive FragLock™ Coat, in Base and Build-Up forms.  Our Level III Steel, unlike ceramic or polyethylene alternatives, is capable of protecting against several direct hits while still being less bulky than competing materials. It also has been independently tested in accordance with NIJ 0101.06 threat levels through Oregon Ballistics (OBL), and H.P. White Laboratories. This means it is rated to stop 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS, and special threat tested to stop 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS. A benefit not elsewhere found in the industry, the Advanced Shooters Cut shape affords you additional room for your rifle stock, improving comfort and shooting ergonomics; this is available in right and left-handed configurations. It is also compatible with all standard plate carriers that accept SAPI or traditional Shooters Cut body armor, given there is an appropriately sized chest plate pocket. Finally, the FragLock™ Coat is a unique feature that guarantees two benefits: First, it gives a twenty-year maintenance-free shelf life - making this steel plate far outlast ceramic or polyethylene alternatives. Second, the coating mitigates the dangers of spalling (when pieces of steel fragment off) and fragmentation (when the bullet’s remains fragment off), protecting the wearer from both the direct ballistic impact and the aftermath of the impact. The Build-Up Coat features stronger protection with the tradeoff of greater weight and size, while the Base Coat is lighter and thinner with less protection. SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States

The number of  MALICE CLIPS® needed for each AR500 Armor pouch. Note, pouches come with MALICE CLIPS so it’s not necessary to add them to your order, but it doesn’t hurt to keep a couple of sets on hand: Single M4 – 2 Long Double M4 – 2 Long Triple M4 – 4 Long QD IFAK – 2 Long Side Plate Pouches – 4 Long (2 per pouch) Small GP – 2 Long TQ Holster – 1 Long Holster – 2 Long and 2 Short Admin – 2 Short Triple Pistol – 2 Short Double Pistol – 2 Short Single Pistol – 1 Short Dump Pouch – 1 Short Shotgun Pouch – 2 Short SOB IFAK – 2 Short AR500 Armor Malice Clip MALICE CLIPS® are injection molded, heavy-duty, reusable connecting clips that are designed to attach modular pouches to MOLLE/PALS style equipment. FIGHT LIGHT MALICE CLIPS® are not affected by heat or cold, and will never corrode or lose their subdued finish. Once properly closed, the clip will not open until it is disengaged by the user using a flat tipped object such as a knife or screwdriver.  The number of  MALICE CLIPS® needed for each AR500 Armor pouch. Note, pouches come with MALICE CLIPS so it’s not necessary to add them to your order, but it doesn’t hurt to keep a couple of sets on hand: Single M4 – 2 Long Double M4 – 2 Long Triple M4 – 4 Long QD IFAK – 2 Long Side Plate Pouches – 4 Long (2 per pouch) Small GP – 2 Long TQ Holster – 1 Long Holster – 2 Long and 2 Short Admin – 2 Short Triple Pistol – 2 Short Double Pistol – 2 Short Single Pistol – 1 Short Dump Pouch – 1 Short Shotgun Pouch – 2 Short SOB IFAK – 2 Short

Highlights Durable: crafted from genuine Cordura® nylon, Hypalon® pull-tabs, and genuine Velcro®; reinforced bar-tacks at all stress points. Versatile: accommodates most single- and double-stack magazines, detachable & adjustable retention flap Light: Single weighs approx 1.6 ounces; double, 1.9 ounces; triple, 3.2 ounces Malice Clips: Single Pistol Magazine Pouch: one short (small) malice clip Double Pistol Magazine Pouch: two short (small) malice clips Triple Pistol Magazine Pouch: two short (small) malice clips AR500 Armor Multi-Caliber Pistol Magazine Single Pouch (MCPMP) The Multi-Caliber Pistol Magazine Pouch accommodates all common pistol magazines in single or double stack form from .22LR to .50AE, and everything in between, even Five-Seven! It’s the perfect companion to our Multi-Caliber Rifle Magazine Pouch. Secure, easy access to your handgun magazines Pouches are constructed from genuine 500D Cordura nylon, and retention flaps feature an easy-to-grip Hypalon® pull tab. The removable retention strap allows you to adjust for magazine capacity, size, and retention...or remove it entirely to run an opened-top configuration. Includes one, two, or three MALICE CLIPS®, as appropriate, to attach to your MOLLE-compatible platform. Highlights Durable: crafted from genuine Cordura® nylon, Hypalon® pull-tabs, and genuine Velcro®; reinforced bar-tacks at all stress points. Versatile: accommodates most single- and double-stack magazines, detachable & adjustable retention flap Light: Single weighs approx 1.6 ounces; double, 1.9 ounces; triple, 3.2 ounces Malice Clips: Single Pistol Magazine Pouch: one short (small) malice clip Double Pistol Magazine Pouch: two short (small) malice clips Triple Pistol Magazine Pouch: two short (small) malice clips

AR500 Phoenix 2.0 Armored Backpack The AR500 Armor® Phoenix armored backpack is a functional pack you can take practically anywhere and which will stop 95% of the rounds used in shooting incidents.   Highlights Confidence: stops bullets used in 95% of gun-related homicides Discreet: multiple low-profile colors available  Peace of mind: protect the entire family Features Durable zippers with Hypalon® pull tabs Padded rear backing for comfort, and padded fully adjustable backpack straps. High traction Hypalon bottom is abrasion and water-resistant Compartments & pockets Large Main Pocket size: 18”x13”x9" (with laptop sleeve) Medium Front pocket size: 10”x10” Small pocket Size: 6”x10” Integrated Body Armor: Level IIIA integrated soft armor: Rated to defeat 6 rounds of .44 Magnum, and .357 Sig at 1,430 feet per second Protective and lightweight anti-microbial and water-resistant rip-stop laminate cover  Backpack + 10"x12” Armor: Less than 3lbs Shelf life: 5 years Level III+ Lightweight integrated steel armor: Rated to defeat calibers up to 5.56x45 M193, 5.56x45 M855/SS109 at 3,000 FPS (+/- 30FPS) and 7.62x39, 7.62x51 NATO Backpack + 11"x15” steel armor (base coat): 9.9 lbs Shelf life: 20 years Pistol Rated - Built-In Body Armor Rifle Rated - Built-In Body Armor AR500 Armor Phoenix Armored Backpack Looking for a functional item you can take practically anywhere and which will stop 95% of the rounds used in shooting incidents? Look no further than the AR500 Armor® Phoenix armored backpack. Discreet protection, always available The Phoenix Armored Backpack is built to stop the bullets used in 95% of gun-related homicides. Nobody will know your backpack doubles as a lifesaving tool. The Phoenix is a low-profile armor system designed to stop the ammunition used in the majority of shootings.  The Phoenix weighs less than 3 pounds in its lightest configuration and comes ready to use. The armor is sewn into the pack, so you never have to worry about forgetting to install your armor or having it shift during use. The generously sized primary compartment features a laptop sleeve, compatible with nearly all laptops. The front pocket is large and includes a key lanyard with hook and retention pockets for pens and other accessories. The flat front-facing pocket is low profile and can accommodate a full-sized pistol for concealment.  Highlights Confidence: stops bullets used in 95% of gun-related homicides Discreet: multiple low-profile colors available  Peace of mind: protect the entire family Features Durable zippers with Hypalon® pull tabs Padded rear backing for comfort, and padded fully adjustable backpack straps. High traction Hypalon bottom is abrasion and water-resistant Compartments & pockets Large Main Pocket size: 18”x13”x9" (with laptop sleeve) Medium Front pocket size: 10”x10” Small pocket Size: 6”x10” Integrated Body Armor: Level IIIA integrated soft armor: Rated to defeat 6 rounds of .44 Magnum, and .357 Sig at 1,430 feet per second Protective and lightweight anti-microbial and water-resistant rip-stop laminate cover  Backpack + 10"x12” Armor: Less than 3lbs Shelf life: 5 years Level III+ Lightweight integrated steel armor: Rated to defeat calibers up to 5.56x45 M193, 5.56x45 M855/SS109 at 3,000 FPS (+/- 30FPS) and 7.62x39, 7.62x51 NATO Backpack + 11"x15” steel armor (base coat): 9.9 lbs Shelf life: 20 years Pistol Rated - Built-In Body Armor Rifle Rated - Built-In Body Armor  

AR500 Armor Quick Detach IFAK (QD IFAK) Your search for a quick detach IFAK pouch has come to an end, and the AR500 Armor® QDIFAK is the answer. Spacious, tear-away feature Medical pouches typically fall into general-purpose, tear-away, or expandable pouch designs. The AR500 Armor® Quick Detachment and Deployable (QD) IFAK combine the best of all worlds with multi-stage deployment and a tear-away feature, mounting to your plate carrier, cummerbund, or any webbed surface and allowing full access to your medical kit immediately. The exterior boasts front and side webbing for easy mounting and immediate access to your tourniquet and features a standard Velcro® patch panel. The mounting panel includes a Trauma Shear retention strap and mounting guides. Once deployed from the closed position, the pouch folds out into a “middle stage” allowing rapid access to your trauma components. The further expansion releases your tear-away medical platform to full length creating an organized and retained display of your IFAK components. The entire platform can be quickly detached in either compact or expanded form for use anywhere your situation requires. Durable elastic is spaced and sized according to a wide array of common medical and trauma supplies for easy customization and layout. Sections can be organized for medical situations such as Bleeding, Breathing, and Burns. Constructed from genuine 1000D Cordura Nylon, and reinforced with heavy-duty Bar-Tack stitching on all webbing. Includes two MALICE CLIPS® for attaching to your MOLLE-compatible platform. If you don't have a medical kit to put in the QDIFAK pouch, we offer an IFAK refill kit that contains equipment necessary to provide treatment for a gunshot, knife/stabbing, or other bleeding injuries. Malice Clips: Two long (large) malice clips IFAK Refill contents: 1 Celox EMS 1 SWAT-T 1 Hyfin compact twin 1 4" emergency compression dressing 1 Compressed Gauze 1 Trauma Shears 1 H&H Duct Tape 1 NAR Bear Claw Gloves 1 Casualty Card 1 Mini Sharpie

Size: 2" x 5.5" Features: Includes (2) Shoulder Pads Compact and low profile design Compatible with up to 2" shoulder straps 1000D Nylon Construction Moisture-wicking and anti-microbial padded mesh Durable Velcro wrap-around closure flap holds pad securely in place Two modular attachment points 100% made in the USA! AR500 Armor Shoulder Pads Shoulder Pads (Pair) Constructed from 1000D Nylon we use a durable wrap-around Velcro closure flap to secure the shoulder pad in place. Our padded mesh fabric is both antimicrobial and moisture-wicking to improve comfort and airflow. Two modular straps act as guides or attachment points for accessories such as radios, hydration tubes, and/or Grimlock's and D-Rings. Compatible with up to 2" shoulder straps. (Includes 2 Shoulder Pads) Size: 2" x 5.5" Features: Includes (2) Shoulder Pads Compact and low profile design Compatible with up to 2" shoulder straps 1000D Nylon Construction Moisture-wicking and anti-microbial padded mesh Durable Velcro wrap-around closure flap holds pad securely in place Two modular attachment points 100% made in the USA!

Highlights Peace of mind: holds most common side armor plates, increasing your protection level Comfort: generous padding without the extra bulk Durable: genuine 500D Cordura nylon and MALICE CLIP for long-lasting durability Malice Clips: four long (large) malice clips - (two per pouch) AR500 Armor Single Padded Side Plate Pouch A real-life shooting isn’t always going to be a day at the range, where you face your target straight on. Armor systems acknowledge this by having a backplate and, based on our military’s experience in the Global War on Terror, side plates. A two-way range is 360 degrees Riding around in vehicles leaves your sides exposed to IED or shots attacking the side of the vehicle. The Padded Multi Side Plate Pouch addresses this by allowing up to 6”x8” side plates to attach to MOLLE-compatible or Velcro®-based plate carrier cummerbunds. Slender in profile, our side plate pouch also features meshed padding for comfort and increased ventilation. Our wrap-around design holds 6”x6” or 6”x8” steel, ceramic, or polyethylene armor. The side plate pouch works with most all existing and new cummerbund designs and attaches to MOLLE-compatible and Velcro® cummerbunds. Comes with a pair of color-matched MALICE CLIPS®. Highlights Peace of mind: holds most common side armor plates, increasing your protection level Comfort: generous padding without the extra bulk Durable: genuine 500D Cordura nylon and MALICE CLIP for long-lasting durability Malice Clips: four long (large) malice clips - (two per pouch)

Fixed Target Stand (2) 4" x 3/8" Carriage Bolts (4) 3" x 3/8" Carriage Bolts (6) 3/8" Flat Washers (6) 3/8" Lock Washers (6) 3/8" Wingnuts (2) Rubber Grommets (2) Stand Legs(2) Stand Leg Braces(1) Target Mounting Bracket Hanging Target Stand (12) 3" x 3/8" Carriage Bolts (12) 3/8" Flat Washers (12) 3/8" Lock Washers (12) 3/8" Wingnuts AR500 Armor Target Stand Kit Fixed Target Stand Our Fixed Target Stand was created from the get-go with the customer in mind. Simply provide your own 2 x4, cut to the length of your preference at your local home improvement store, assemble, and enjoy! Designed to bring you the best value, our Fixed Target Stand, will mount any of our 1/2" steel targets. However, please note, you are responsible for the safe and proper use of your stand. Should any components become damaged, you must absolutely replace them. Hardware Included (2) 4" x 3/8" Carriage Bolts (4) 3" x 3/8" Carriage Bolts (6) 3/8" Flat Washers (6) 3/8" Lock Washers (6) 3/8" Wingnuts (2) Rubber Grommets (2) Stand Legs(2) Stand Leg Braces(1) Target Mounting Bracket Hanging Target Stand Our Hanging Target Stand Kit comes with all of the hardware you need to construct your own hanging target stand. The Hanging Target Stand kit was designed to be customizable, affordable, and easy to assemble. All you need is 2 x 4 wood cut to whichever lengths you prefer to create the ideal stand size for your needs. Capable of supporting the weight of multiple targets!Please note, you will need to supply your own 2 x 4 wood. Most local home improvement stores will cut the wood to your specifications upon request. You will be required to drill the holes necessary for mounting the construction brackets, on 2 x 4 pieces of wood. Note: The hanging target stand requires hardware (sold separately) to mount hanging targets.Hardware Included: (12) 3" x 3/8" Carriage Bolts (12) 3/8" Flat Washers (12) 3/8" Lock Washers (12) 3/8" Wingnuts

SPECIFICATIONS Material: Military-grade ½” MIL-A 46100 steel plate Dimensions: 3" x 4" Weight: 1.6 lbs each AR500 Armor Training Plate Set Our Miniature Weight Plates weigh in at 1.6lb each and can be used in any or all of the 12 mounts on the Atlas to fine-tune weight for increased resistance. Alternatively, you can load our Miniature Weight Plates into your standard AR15 magazine pouches for training purposes. Each training plate is coated with the same base coat as all AR500 Armor® Body Armor providing protection against the elements, making them water and abrasion-resistant. SPECIFICATIONS Material: Military-grade ½” MIL-A 46100 steel plate Dimensions: 3" x 4" Weight: 1.6 lbs each

SPECIFICATIONS Material: Military-grade ½” MIL-A 46100 steel plate Weight:  5.75 lbs x 2 weighted plates = 11.5 lbs 8.75 lbs x 2 weighted plates = 17.5 lbs 10 lbs x 2 weighted plates (8" x 10") = 20 lbs 15 lbs x 2 weighted plates = 30 lbs AR500 Armor Weighted Training Plate You will be passing these training plates down for generations, we guarantee it. Available in 5.75lb, 8.75lb & 15lb, these Training Plates fit all plate carriers designed to accept 10” x 12” body armor or larger. Ergonomically designed to mimic armor by the form of a common shooter cut. Improved with an upper relief cut for better mobility while using a plate carrier during training and workouts.  Our Advanced Training Cut is designed to meet the needs of members of Crossfit to allow the weight of the plates and carrier to reach the 14/20 rule. *+/- 0.2875lbs for the 5.75lb plate (5.46-6.04lbs) Additionally, we offer an 8" x 10" weight plate set at 10lbs each. SPECIFICATIONS Material: Military-grade ½” MIL-A 46100 steel plate Weight:  5.75 lbs x 2 weighted plates = 11.5 lbs 8.75 lbs x 2 weighted plates = 17.5 lbs 10 lbs x 2 weighted plates (8" x 10") = 20 lbs 15 lbs x 2 weighted plates = 30 lbs

SPECIFICATIONS Material: Cordura Nylon (pink and green) and Vinyl (clear) Armor Protection: Level IIIA integrated soft armor rated to defeat 6 rounds of .44 Magnum, and .357 Sig at 1,430 feet per second Features: stops bullets used in 95% of gun-related homicides, protective and lightweight anti-microbial and water-resistant rip-stop laminate cover, padded rear backing for comfort, and padded fully adjustable backpack straps.  Compartments & Pockets: Large Main Pocket size: 13”h x 11.5”w x 5"d  Front pocket size: 7.25”h x 9.5”w x 2.4”d Weight: 2.28 lbs Shelf Life: 5 years AR500 XS Armored Backpack The XS Armored Backpack is built to stop the bullets used in 95% of gun-related homicides. The XS’s low-profile design means nobody will know your backpack doubles as a lifesaving tool.  The XS weighs over 2 pounds and comes ready to use right out of the box. The armor is sewn into the back panel of the pack, so you’ll never worry about leaving home having forgotten to put your armor into your pack. The XS comes is made of genuine Cordura® nylon (pink and green), and is also available in clear vinyl for use when a transparent backpack is required. The outer pocket contains holders for pens/pencils and includes a small pocket for business cards or similarly sized items. Whether it’s for work, school, or play, the AR500 Armor XS backpack offers you always-there protection in a discreet, lightweight package.  SPECIFICATIONS Material: Cordura Nylon (pink and green) and Vinyl (clear) Armor Protection: Level IIIA integrated soft armor rated to defeat 6 rounds of .44 Magnum, and .357 Sig at 1,430 feet per second Features: stops bullets used in 95% of gun-related homicides, protective and lightweight anti-microbial and water-resistant rip-stop laminate cover, padded rear backing for comfort, and padded fully adjustable backpack straps.  Compartments & Pockets: Large Main Pocket size: 13”h x 11.5”w x 5"d  Front pocket size: 7.25”h x 9.5”w x 2.4”d Weight: 2.28 lbs Shelf Life: 5 years

Highlights NIJ IIIA Certified Materials Durable Construction Slim Tapered Profile Unobtrusive Design 5 Year Warranty Concealable Black What”s Included 1 Backpack Insert Backpack Armor Inserts The Bullet Resistant Backpack Armor Insert is designed to easily fit into any backpack. You can also use it in a purse, briefcase, or laptop bag. This bullet resistant insert uses the same ballistic materials as our vests that is rated NIJ Level IIIA. Durable and light weight construction and a slim profile make this insert a great addition to any bag for any situation. Highlights NIJ IIIA Certified Materials Durable Construction Slim Tapered Profile Unobtrusive Design 5 Year Warranty Concealable Black What”s Included 1 Backpack Insert NOTE: The National Institute of Justice does not certify backpack armor, however we construct these inserts with the same certified ballistic package as our Vests and Carriers.  Specifications Backpack Insert Weights (lbs) Size Light Lighter Lightest SM (10x14) 1.57 lbs 1.26 lbs 0.89 lbs LG (12x17) 2.32 lbs 1.85 lbs 1.26 lbs

Highlights NIJ Certified Level III UHMWPE Material Construction Fully Sealed Stand Alone Multi Curve Stress Fracture Resistant Light Weight User Friendly Design Special Threat Performance 7.62 x 39mm, 123gr, FMJ 5.56 x 45mm, 55gr M193 Ball Whats Included 1 Level III Polyethylene Plate Specifications Size 10” x 12” Weight (lbs): 3.2 Thickness: 1” Tolerances: +/_ .25” - +/_ 0.25 lbs Level III Lightweight Poly Plate This is our Level III Polyethylene Plate. This stand alone Ultra High Molecular Weight Polyethylene (UHMWPE) Plate is lightweight, durable, and easily fits into our plate carriers and vests. The Multi Curve design fits to the contours of the body for maximum safety and comfort while maintaining peak performance in the field. This ultra light weight plate is  meant to increase your ballistic coverage with out weighing you down! Highlights NIJ Certified Level III UHMWPE Material Construction Fully Sealed Stand Alone Multi Curve Stress Fracture Resistant Light Weight User Friendly Design Special Threat Performance 7.62 x 39mm, 123gr, FMJ 5.56 x 45mm, 55gr M193 Ball Whats Included 1 Level III Polyethylene Plate Specifications Size 10” x 12” Weight (lbs): 3.2 Thickness: 1” Tolerances: +/_ .25” - +/_ 0.25 lbs

Highlights NIJ Certified Level IV Made with Ceramic Materials User-Friendly Design Fully Sealed with 1000D Cordura, Textured Nylon Stand Alone What’s Included 1 Level IV NIJ Certified 10" x 12" Ceramic Plate Shooters Cut Specifications NIJ Certified Size 10” x 12” Shooters Cut Weight (lbs): 7.2 Thickness: .95” Tolerances: +/_ .25” - +/_ 0.25 lbs Level IV Ceramic Plate Introducing the Body Armor Direct Level IV Ceramic plate offering that is made of Ceramic materials and is NIJ Certified. Made with ceramics and special pressing techniques the single curve design fits to the body for maximum safety and comfort for a lighter, thinner, high performing plate. Rugged, reliable, and stress fracture resistant. Highlights NIJ Certified Level IV Made with Ceramic Materials User-Friendly Design Fully Sealed with 1000D Cordura, Textured Nylon Stand Alone What’s Included 1 Level IV NIJ Certified 10" x 12" Ceramic Plate Shooters Cut Specifications NIJ Certified Size 10” x 12” Shooters Cut Weight (lbs): 7.2 Thickness: .95” Tolerances: +/_ .25” - +/_ 0.25 lbs

MVP Plate Carrier Holds 10" x 12" plates Laser cut plate carrier Super Lightweight All-Day Comfort Stretch Compression Material Easily Washable What’s Included 1 Qty. Original Laser Cut Plate Carrier Hard armor as selected 

External carrier with uniform appearance 600 denier polyester outer shell material 4 permanent sewn-in creases Two functional chest pockets with hook and loop closures Formal shoulder epaulets double as mic tabs Easy and secure body-side panel access Panel suspension for proper alignment prevents sagging and curling Adjustable shoulder straps Elastic side straps for better comfort and mobility Internal 6x8 and 7x9 front trauma plate pockets WHAT IS INCLUDED: 1 Qty. Uniform Style Carrier with no armor Uniform Style Carrier Introducing our Uniform Shirt Carrier. The carrier is 100%  Made in the USA for YOU by hard working Americans using mostly sewing machines.  The carrier is worn by law enforcement, private security and any adult  that needs protection.  External carrier with uniform appearance 600 denier polyester outer shell material 4 permanent sewn-in creases Two functional chest pockets with hook and loop closures Formal shoulder epaulets double as mic tabs Easy and secure body-side panel access Panel suspension for proper alignment prevents sagging and curling Adjustable shoulder straps Elastic side straps for better comfort and mobility Internal 6x8 and 7x9 front trauma plate pockets WHAT IS INCLUDED: 1 Qty. Uniform Style Carrier with no armor

Predator Armor Trauma Pad - Single - 10x12 Predator Armor Non-Ballistic Trauma Pads are an added layer that protects you from injuries caused by back face deformation. Trauma Pads dissipate the impact energy and reduce transmitted force. Our Trama Pads are engineered to provide comfort when wearing our body armor panels. The materials are high density and flexible-- making it able to reduce blunt force trauma by absorbing the imapct energy.  Predator Armor Trauma Pads work perfectly in tandem with our Level III and Level III+ Armor to increase comfort and reduce blunt force.

The Target Man™ Angle IronHere we have angle iron as an option, but we highly suggest NOT buying it from us. You can source it locally for about $5-10/piece. The shipping is killer, which is why we have to charge so much. You MUST use 1.5″ x .25 American-spec (standard type) angle iron. Available at most home improvement stores or any steel yard.   Please Note: This is the only the Angle Iron  See A Comparison of Our Full Line Reactive Steel Targets on page 2:

SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SHOOTERS CUT SET OF TWO Product Overview Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Protective Value Added  We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.    Battle Hardened Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.   IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.   Blazing The Trail of Innovation Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Plate Weight (per plate): 8”x10” AR550 Shooters Cut: Base Coat 5lbs 5oz. Full Coat 6lbs 1oz. 10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz. Full Coat 8lbs 10oz. 11”x14” AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs.   Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.    AR550 Body Armor - Shooters Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See a Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.        

Spartan Armor Systems® AR550 Body Armor Swimmers Cut body armor is specifically designed to feature a streamlined cut, which reduces overall weight, enhances mobility, comfort, and ergonomics in the field while affording this higher degree of threat protection. SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SWIMMERS CUT SET OF TWO Product Overview Spartan Armor Systems® AR550 Body Armor Swimmers Cut body armor is specifically designed to feature a streamlined cut, which reduces overall weight, enhances mobility, comfort, and ergonomics in the field while affording this higher degree of threat protection. As with our other AR550 body armor products, Spartan Armor Systems® AR550 Body Armor Swimmers Cut body armor has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. Protective Value Added  We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.    Battle Hardened Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.  IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation.    Blazing The Trail of Innovation Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Chest Plate Weight (per plate): 8x10 AR550 Swimmers Cut: Base Coat 4lbs 6oz. Full Coat 4lbs 14oz. 10x12 AR550 Swimmers Cut: Base Coat 6lbs 10oz. Full Coat 7lbs 8oz. 11x14 AR550 Swimmers Cut: Base Coat 8lbs 5oz. Full Coat 8lbs 13oz.   Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.    AR550 Body Armor - Swimmers Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See a Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.  

JK Jack Mount for Hi-Lift® Jacks The JK Jack Mount allows you to easily mount you Hi-Lift® jack to save time and space in your jeep. This convenient storage solution is made from quality parts and designed to last. The JK Jeep Mount is the perfect accessory for your jeep both on and off-road.      Note: Please know the year/model of your Jeep before purchasing.  Jeep JK's are from 2007 - current. Here are the specs of  the JK Jack Mount..... CNC Cut to perfection each and every time. 3/16" Hot Rolled Pickled and Oiled (HRPO) steel construction Slotted bolt holes to accommodate a hi-lift brand jack or most generic hi-lift jacks (have not heard of one not work yet) Precision bends on a CNC press brake! Powder coated TO LAST STAINLESS STEEL hardware to mount the brackets on the hood of your jeep Grade-5 jack mounting hardware All jack mounting hardware and instructions are included.

DOM pivot tubes provide extreme resistance to wear and are twice the thickness of our our standard pivot tubes provided with our kits. Your dueling tree will get a lot more life from the additional strength of the thicker walled pivot tubes. Well worth the upgrade! See A Comparison of Our Full Line Reactive Steel Targets on page 2:

SPARTAN ARMOR SYSTEMS® FLEX FUSED CORE™ IIIA SOFT BODY ARMOR   Product Overview  Spartan Armor Systems® listens to their customer base, and we answered the call when it came to developing and producing superior pistol-rated level IIIA soft body armor. According to 2019 DOJ crime statistics, 17x more homicides are committed with handguns versus rifles. With crime and homicides on the rise in many major cities, level IIIA soft body armor has become more relevant than ever. The Spartan Armor Systems®™ Flex Fused Core™ Soft Armor is extremely low profile, flexible, comfortable, and easy to wear. Composed of only the best American-made materials and proudly assembled in our state-of-the-art facility in Tucson, Arizona. If you’re looking for discreet protection against handgun threats, Flex Fused Core™ IIIA Soft Armor is an affordable solution made with the highest quality standards.   Comfortable, Concealable, Effective Spartan Armor Systems® Flex Fused Core™ has been tested by an independent NIJ credentialed laboratory to verify that it meets NIJ level IIIA specifications, which means it will stop .44 MAG SJHP, as well as being Special Threat Rated to stop.357 SIG FMJ impacts. This soft armor is also multi-hit rated and is capable of stopping up to 6 rounds. The low-profile nature of the armor combined with the superior standards in quality control and production ensure that Spartan Armor Systems®™ Flex Fused Core™ Soft Armor IIIA Soft Body Armor will remain as rugged, durable, and effective as it is comfortable. This is a fantastic option for those seeking to use the Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor in discrete environments, or for those looking to enhance any of their Spartan Armor Systems® hard armor products.    Spartan Armor Systems® Flex Fused Core™ Soft Armor IIIA Soft Body Armor Specs:  Tested And Passed In Accordance With NIJ-std-0101.06 / MIL-STD-662F Rated To Stop .44 MAG SJHP, As Well As Special Threat Rated To Stop .357 Sig FMJ Multi-hit Rated To Stop 6 Rounds This Soft Armor Can Be Used Stand-alone, Giving Level IIIA Protection Or ICW (In Conjunction With) As A Backer On Any Of Hard Armor Systems All Parts Of This Product Are Proudly American Made .35" Profile 10" X 12" Panel: Weight 1.14 Lb Made In U.S.A.

SPARTAN™ OMEGA™ AR500 BODY ARMOR SHOOTERS CUT SET OF TWO   Product Overview Armor befitting of a modern-day Spartan… The Spartan™ Omega™ AR500 Body Armor is sold as a pair of plates, and is constructed from ¼” thick lab certified AR500 Omega™ Armor ballistic-grade steel. The Spartan Omega AR500 plates are available in three sizes (8”x10”, 10”x12” and 11”x14”) and provide the operator with Level III protection in accordance with NIJ0101.06 standards. As with all other body armor sold by Spartan Armor Systems®, our Spartan™ Omega™ AR500 body armor has been independently tested and verified by an independent NIJ credentialed laboratory.    Spartan™ Omega™ AR500 Body Armor - True High-Quality Ballistic Threat Protection Not all steel core body armor is created equal! At Spartan Armor Systems® we are honored to provide our customers with the highest quality armor on the market because we understand intimately what is at stake. All Spartan™ Omega™ AR500 Body Armor products use only ballistic LAB CERTIFIED AR500 steel. All purchases of our Spartan Armor products have current lab certificates available on request, ensuring you have peace of mind when it comes to receiving the highest quality and integrity with your Spartan Armor Systems® body armor. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Don’t settle for sub-standard, ineffective, low-quality steel armor - your life may depend on it. Read our "FAQ" to learn more about the extensive testing and quality assurance all Spartan™ Omega™ AR500 Body Armor is subjected to and to learn about the quality of steel we use to construct our body armor!   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting to protect the ballistic integrity throughout the entirety of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.  Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.    Exceptional Comfort & Engineering You have the choice of getting our Spartan™ Omega™ AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved Spartan™ Omega™ AR500 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.    Chest Plate Weight (per plate):  8”x10” Plate: Base Coat 5lbs 13oz. Full Coat 6lbs 7oz 10"x12" Plate: Base Coat 8lbs 10oz. Full Coat 9lbs 11oz. 11"x14" Plate: Base Coat 10lbs 1oz. Full Coat 11lbs 6oz. Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.   Additional Spartan™ Omega™ AR500 Body Armor - Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:   Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.       *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

SPARTAN™ OMEGA™ AR500 BODY ARMOR SWIMMERS CUT SET OF TWO   Product Overview Sleek, lightweight, and ready to move, the Swimmers Cut Spartan™ Omega™ AR500 Body Armor affords operators with increased mobility, a decrease in overall weight. The “Swimmers Cut” gets its name from the improved range of motion in the shoulders due to the angle of cut in the top corners of the plate. This allows for a lighter and less obstructive body armor plate while still providing coverage for vital organs. Swimmers Cut Spartan™ Omega™ AR500 Body Armor is constructed from lab certified AR500 ballistic grade steel, (¼” thickness) and these body armor plates provide the operator with Level III protection in accordance with NIJ0101.06 standards. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. When the environment dictates speed and mobility as primary and critical factors, the Spartan omega AR500 Body Armor Swimmers Cut Plates are an excellent choice.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® Spartan™ Omega™ AR500 Body Armor plates proudly bears the mark of our Spartan logo.    IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation.   Exceptional Comfort & Engineering You have the choice of getting our AR500 Body Armor formed on a continual radius die (single curve) or with our proprietary and patented Advanced Triple Curve™ (ATC) formation. It is important to note that our single curve plate is the equivalent of what our competitors deem “multi-curve” and our ATC design is a true multi-curve plate with unique curvature at the top, bottom, and sides of the plate. At Spartan Armor Systems® we have machined custom tooling to craft our plates with a sleek curvature that conforms and wraps to your torso for enhanced ergonomics. Spartan Armor Systems®™ is proud to be the FIRST in the industry to commercially offer the triple-curved AR550 Body Armor. Spartan Armor Systems®’ ATC body armor allows the operator to shoulder their weapon with the most freedom and limited discomfort. The ATC design provides a snug, comfortable fit and “hugs” the operator’s body, resulting in a significant increase in comfort and operational maneuverability. Our custom-configured CNC equipment and advanced understanding of what makes Steel Core Armor most effective has allowed us to create dies that form our body armor without any “crease” bends. Crease-bends, “work hardens” the plate, which causes a significant amount of stress to the portion of the plate being placed under load during the manufacturing process. We HIGHLY suggest when doing your research, that you ask any manufacturer under consideration if they crease bend their body armor. This process results in increased potential for plate fatigue and failure, which is why Spartan Armor Systems®™ has gone the extra mile to create this unique die process.  Chest Plate Weight (per plate):  8x10 Plate: Base Coat 5lbs. Full Coat 5lbs 11oz. 10x12 Plate: Base Coat 7lbs 7oz. Full Coat 8lbs 1oz. 11x14 Plate: Base Coat 9lbs 2oz. Full Coat 10lbs 15oz. Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.    Spartan™ Omega™ AR500 Body Armor Specs:  Made in U.S.A. Meets NIJ 0101.06 Level III Specifications Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See A Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.   *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems Spartan™ Omega™ AR500 Body Armor Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.